1. Hydrolysis methods and technical conditions and indicators Hydrolysis includes both dilute hydrolysis and neutralization hydrolysis. In the case of dewatered dilute good hydrolysis and it should not be used in hydrolysis, and the hydrolysis is only applicable to very complex anode sludge and concentrate infusion Jamesonite lead ore reducing solution. The dilute hydrolysis is carried out at a normal temperature, and the hydrolyzate is controlled to contain Sb3+1 to 2g∕L, and the amount of water added is calculated by the formula (1). After dehydration, the mixture was stirred for 10 to 20 minutes; the chlorinated filter cake was washed with pure water for 8 times or more. The numerically controlled hydrolysis rate of the neutralization hydrolysis process is 45% to 50% when the lead anode mud is used. 85% is used for the Changpo brittle sulphur concentrate, and the ammonia or soda is used as the neutralizing agent, and is calculated according to formula (2). The amount of addition, the washing requirements are the same as the dilute hydrolysis process. If necessary, some compounding agents are added during the hydrolysis to improve product quality. The hydrolysis rate is very high (≥95%). The hydrolyzate contains ∕1g∕L. Second, the hydrolysis process When the reducing solution is added to the clarified water, SbCl3 begins to hydrolyze, producing some unstable intermediates: The slurry is very viscous and requires agitation, followed by an obvious dehydration process: Sb4O5Cl2 with good filtration performance is prepared. After dehydration for 10-20 min, the agitation was stopped, and then the supernatant was extracted, and then the chlorination of the bottom was filtered. For medium-sized and above factories, it is better to filter with a filter. The filter is equipped with a filter section and a washing section. It is washed with pure water to ensure clean chlorination, continuous filtration, and low labor intensity. Small-scale plants are filtered using a vacuum suction tank. After the hydrolyzate is filtered, the filter cake is washed with pure water for 8 times or more to ensure the cleaning of the impurity elements. The twin screw extruder is designed for the production of wood plastic composite products. HUADE targets to provide the optimal solutions for the customer's needs with the advantage of flexibility in material choices, high performance and long durability. wpc decking co extrusion line, wpc lastic profile extrusion machine,Wpc Outdoor Floor Make Machinery,Wood PE Composite Fencing Machine Zhangjiagang Huade Machinery Technology Co.,Ltd , https://www.tophdextruder.com
Hydrolysis of cerium sulfide concentrate leaching reduction solution