Introduction: Optical cutting machine adopts international advanced fiber laser to output laser beam with high energy density and focuses on the surface of the workpiece. It instantly melts and vaporizes the area on the workpiece that is irradiated by the ultra-fine focus spot, and moves the spot through the CNC system. Location and automatic cutting. Laser cutting machine is a high-tech equipment integrating advanced fiber laser technology, numerical control technology, and precision machinery technology. Wide range of uses, suitable for processing all kinds of metal materials, including drilling, marking and so on. Spanish fiberglass roof tile is a good replacement for traditional terracotta tile. The four layers are ASA coating, PVC layer, fiberglass mesh and the bottom layer of PVC. The upper part of the reinforced resin tile is selected as weather resistant engineering resin material to ensure that the resin glass fiber tile has anti-aging and bright appearance. After adopting composite coextrusion technology and forming at one time, the reinforced resin tile has various advantages compared with the same type of plastic tile in various aspects. Lowes Roofing Panels,Fiberglass Roof Tiles,Clear Roofing Sheets,Fiberglass Roof Panels PINGYUN INTERNATIONAL , https://www.pingyunconstruction.com
The cooling system is turned on for a long time but the laser power is not turned on, causing freezing and condensing water. At this time, the laser power will not be turned on again. In the process of use, the process should be followed to avoid the above situation. Under normal circumstances, the correct order of use is: start, open air, water-cooled units, freeze dryers, air compressors, main engines, and lasers. The shutdown sequence is: first, under high pressure, at low pressure, after the turbine has stopped spinning, turn off the laser. Followed by water-cooled units, air compressors, gas, dryers, the host can stay behind, and finally turn off the regulator cabinet.
Only by mastering the correct use of the order and rules can we better use the fiber laser cutting machine, but also Yancheng its service life.
Cautions after condensing water from fiber laser cutting machine