China has become the third largest, second largest, and even the largest market in the world. The improvement of market position has also enabled multinational auto companies to increase their investment in China. In 2011, the capacity expansion of joint venture car enterprises accelerated, and the pattern of battles in 2012 gradually became apparent. Volkswagen's South West into China's production capacity layout is about to be completed The founding ceremony of FAW-Volkswagen Foshan Branch was held on December 1, 2011. This is the FAW-Volkswagen. Following the commissioning of the third car factory in Chengdu, the construction of another car production base has entered a substantive phase. It is reported that the construction of the FAW-Volkswagen Guangdong project is proceeding in an orderly manner. The project is divided into two phases. The first phase covers an area of ​​100,390 square meters and the planned construction area is 455,000 square meters. It is expected to be put into operation in August 2013 with a production capacity of about 300,000 units. With the establishment of the Foshan factory, the Volkswagen South strategy has once again fallen. Just a few days after the establishment of FAW-Volkswagen Foshan Branch, the Xinjiang government website published a message saying that the National Development and Reform Commission has approved Shanghai Volkswagen's plan to build a final assembly plant in Xinjiang. On December 13, Volkswagen China denied the news and said that the choice of the new site is still under negotiation. Xinjiang government network information shows that the relevant ministries officially sent a letter to the Autonomous Region Development and Reform Commission, and agreed to carry out the preliminary work of the Shanghai Volkswagen Xinjiang production base passenger car project. The project is located in the Urumqi Economic and Technological Development Zone, with a designed production capacity of 50,000 vehicles. The production model is a Class A sedan, and other related facilities are built. The total investment of the project is 2 billion yuan. It is planned to be put into operation in 2013. After reaching production in 2016, it will form a new model with a production capacity of 50,000 units/year. At this point, Volkswagen's FAW-Volkswagen and Shanghai Volkswagen joint ventures will soon have more than 10 vehicle production plants in China, which means that Volkswagen's production capacity in Northeast China, East China, South China, Southwest China and Northwest China is basically completed. Dongfeng limited layout new capacity or for Infiniti domestic base At the end of 2011, the environmental impact assessment report of Dongfeng Motor (600006, stock bar) Co., Ltd. Dalian plant passenger car 240,000 capacity construction project on the official website of Dalian Environmental Protection Bureau, disclosed in detail Dongfeng Motor Co., Ltd. (hereinafter referred to as Dongfeng Limited) Details of the Dalian factory. The EIA report revealed that the new Dalian Dongfeng Plant will be built in the Dalian Bonded Zone with an investment of more than 5 billion yuan and covers an area of ​​1.268 million square meters. The proposed plant includes “pressing workshop, welding workshop, painting workshop, Assembly shop, quality assurance center (dynamic analysis area), etc.". The above EIA report also revealed that the new plant plans to produce 25,000 mid- to high-end SUV products in 2014; in 2015, it will produce 80,000 mid- to high-end SUV products and 40,000 high-end SUV products; in 2016, the total production capacity will be further increased to 14.5 million vehicles began to produce high-end MPV products; finally, by 2017, high-end SED products will be produced, and the total design capacity target will be 240,000 units. The industry speculates that the future Infiniti domestic models are also likely to be put into production at the Dalian plant. Dongfeng Nissan's second plant put into production capacity of 1 million vehicles On December 21, 2011, the second factory of Dongfeng Nissan Huadu, which was built in 19 months, was officially completed and put into production. According to reports, after the plant is put into production, the production capacity of the Dongfeng Nissan Huadu plant will reach 600,000 units in 2012, and the annual production capacity will increase to 670,000 units. At this point, Nissan's largest and most efficient vehicle production base in the world has settled in Huadu, and the design capacity of the three major production bases of Dongfeng Nissan Huadu, Xiangyang and Zhengzhou has reached 1 million. BMW Brilliance new plant will be put into production this year BMW Brilliance's new Tiexi plant in Shenyang will be commissioned in early 2012, and the BMW X1 will be the first production model of the new plant. The new BMW Brilliance plant was laid in June 2010. The first phase of the project is about to be completed and is now in the equipment commissioning phase. According to BMW, the new plant will be one of the most advanced and sustainable automotive plants in the world. BMW said it will strengthen its R&D activities in China and will build an engine plant under the overall framework of the new plant construction. Although the engine plant has not yet been built, BMW has announced that it will soon introduce a new BMW TwinPower Turbo inline 4-cylinder petrol booster engine in Shenyang. Shanghai GM's annual production capacity is directly at 1.2 million On December 16, 2011, the first vehicle of the Shanghai GM Dongyue Automobile Phase III expansion project was successfully rolled out in the new assembly shop, which means that Shanghai GM's capacity expansion project at Dongyue Base has made progress. In September 2011, the groundbreaking ceremony for the new plant of the third phase of the Shanghai Beisheng Shenyang Beisheng Production Base was held. The total investment of the project is 7 billion yuan, the planned land is about 20,000 square kilometers, and the designed annual production capacity is 300,000 vehicles. It is planned for 2014. It was completed and put into production in the year, which eased the production capacity of the Chevrolet Cruze and Buick GL 8 produced here. After the completion of the new factory in Dongyue and Beisheng, Shanghai GM's total production capacity will be expanded to 1.2 million units.
A method for manufacturing durable superhydrophobic and superoleophilic filter paper for oil–water separation was developed via colloidal deposition. A porous film composed of PTFE nanoparticles was formed on filter paper, which was superhydrophobic with a water contact angle of 155.5° and superoleophilic with an oil contact angle of 0°. The obtained filter paper could separate a series of oil–water mixtures effectively with high separation efficiencies over 99%. Besides, the as-prepared filter paper kept stable superhydrophobicity and high separation efficiency even after 30 cycle times and could also work well under harsh environmental conditions like strong acidic or alkaline solutions, high temperature and ultraviolet irradiation. Compared with other approaches for fabricating oil–water materials, this approach is able to fabricate full-scale durable and practical oil–water materials easily and economically. The as-prepared filter paper is a promising candidate for oil–water separation.
Oil-water Separation Filter Paper Oil-Water Separation Filter Paper,Thin Separation Filter Paper,Fuel Separation Filter Jincheng Filter Paper Co., Ltd , http://www.jcfilterpaper.com
·Joint venture car: 2011 capacity expansion Rio Tinto territory map