1. The use and maintenance of the chassis and engine parts of the Dongfeng Tanker Truck shall be carried out in accordance with the instructions for use of the truck. 2. The use and maintenance of the Dongfeng tanker oil pump are strictly performed in accordance with its instructions for use and maintenance.
Zinc Alloy Die Casting products in order to prevent surface oxidation and the appearance is only superficial. Zinc alloy material properties that well to accept the material surface treatment affordable. So, the usual surface treatment, what does?
Zinc Casting Surface Finished, Die Casting Surface Finish, Surface Finished Casting Parts Ningbo Zhenhai Xinxie Machinery Co.LTD , http://www.xinxie-diecasting.com
3. The use and maintenance of the Dongfeng tanker refuelling machine should be performed in accordance with its instructions for use.
4. The filter should be washed and washed frequently.
5. Dongfeng tanks and piping systems should be cleaned regularly.
6. Safety valves should always be checked and cleaned.
7. Regularly inspect the joints of the pipeline system for good connection and reliable sealing.
8. After each work is completed, the ball valve handle should be turned to the closed state.
9. The ball valve should not normally be in a half-open state to avoid damage to the seat.
10. After each work is completed, cover the inlet and outlet end caps (caps) and the ends of the oil hoses (blocking caps) in time.
11. The oil loading should not exceed the rated loading quality. (Converted by fuel density).
12. Before the east wind tanker drives, the power take-off box must be disengaged.
13. Before working on the refueling vehicle, a conductive rod must be inserted into the damp soil. The grounding chain should be grounded and the static conduction should be maintained during the operation.
14. When driving on a refuelling vehicle, it must be chained.
15. Before refueling the vehicle, check whether the pipeline system leaks oil, if the grounding wire is disconnected, and if the exhaust pipe is damaged, find out that the problem should be resolved before proceeding.
16. It is not allowed to strike the parts on the refueling car with metal objects in order to avoid sparks. During operation, care should be taken not to generate sparks. When the oil is measured, it should be performed in accordance with relevant regulations.
17. Fuel dispensers are generally equipped with two fire extinguishers. Users should be familiar with the use of fire extinguishers and inspect and maintain them in accordance with their instructions.
18. When working in a Dongfeng Tanker, attention should be paid to the ventilation and there must be protection from outside the tank.
As follows:
1: Baked paint (baking enamel) baked paint is a kind of modern technology, the use of paint and then use the high temperature heat quickly paint will penetrate the surface of the material was baked, baked paint device specified by a customer should be the equipment end of the use of poison gas recovery equipment will be toxic substances quickly to accept to be ruled out. This process allows the paint is not easy to fade off, partly because of harmful substances of the paint already baked paint process is absorbed exclude, so in the future use will not be released into the atmosphere, the people and the environment can be reduced to a minimum.
2: phosphating (phosphatizing) is a chemical and electrochemical reactions is the formation of the phosphate chemical conversion coating process, the formation of phosphate conversion coating is called a phosphate film. The aim is to give the base metal to provide protection to prevent the metal is corrupt to a certain extent. For the primer before painting, powder coating or electrophoresis, to improve the adhesion and anti-corrosion ability.
3: (chromating) chromate solution and metal effects on the surface of the trivalent or hexavalent chromium layer process used for the processing of zinc, aluminum, magnesium alloy and the appearance of decorative surface treatment, such as : car handle, sanitary products, construction (decorative) metal, door and window handles. The same time, the chromium can be divided into the following categories (color) sand chrome, matt chrome,Shiny chrome, pearl chrome (painted pearl chrome), the ancient green (antique brass) and so on.
4: electrostatic powder (electrostatic powder spraying) in order to avoid the paint defects, the introduction of the electrostatic powder coating technology. Electrostatic powder coating is a new technology, the principle is the high-voltage electrostatic spray resin powder paste on the base metal surface, forming a protective film. This layer of protective film itself is environmentally safe, In addition, the protective film can also be sealed to the metal surface of the substrate to prevent the release of harmful objects. This new type of "solid paint" instead of liquid paint, which is characterized by the release of formaldehyde and other harmful gases can also be recycled. The same time, it can produce rich, saturated colors can be sprayed to any pattern, is very suitable to use.
Daily maintenance of Dongfeng Tanker
The daily maintenance of Dongfeng Tanker has the following issues: