Ouke inverter dredging can achieve the start and stop can be controlled by the inverter keyboard to make control easier. A frequency converter frequency given way is the keyboard potentiometer given another frequency converter frequency given way is given an external potentiometer, in order to distinguish between the two machines color, the other one, you need to reverse the operation, During the operation of the conveyor belt slower, it is recommended that customers use relatively large speed reducer, to solve the problem of low frequency inverter torque. Before starting the entire mechanical transmission system and machine oil to check, and then open ... Ouke inverter dredging can achieve the start and stop can be controlled by the inverter keyboard to make control easier. A frequency converter frequency given way is the keyboard potentiometer given another frequency converter frequency given way is given an external potentiometer, in order to distinguish between the two machines color, the other one, you need to reverse the operation, During the operation of the conveyor belt slower, it is recommended that customers use relatively large speed reducer, to solve the problem of low frequency inverter torque. Before starting the machine, check the entire mechanical transmission system and machine oil, and then start pulling the conveyor belt behind the diesel engine, pull the clutch, start the diesel engine, slowly loose the clutch, the speed to normal. Then start the front zipper fighting diesel engine. Two diesel engines after starting. Adjust speed to speed. Then release the boom brakes. Slowly down, wait for more than 2/3 of the sand in the hopper, you can stop decentralization, to be funded until the next 1/3 of the arm. When the boom and the water surface into a 45 degree angle (ie about 5 meters), should park the boom. At this time, the amount of sand in the hopper is switched to traction control. When going forward, it is necessary to check the number of sand in the bucket. The forward and backward movements should be flexible. In case of hard working of collapsed sand machine, Retreat until digging. If there is a big stone or muddy layer in the water, the hull will have violent vibration phenomenon. At this moment, the dredging boom should be lifted immediately to avoid the obstacle.
Snap-in tubeless valves are used in passenger car tires. It`s made of rubber with copper stem and valve core inside. We supply a full range of good quality Tire Valves including TR412, TR413, TR414, TR415 and rubber tire valves with chromed sleeves or colored sleeve and valve caps.
Snap-in Tubeless Valve Snap-in Tubeless Valve,Rubber Snap-in Tubeless Valve,Tubeless Snap-in Tire Valve Ningbo Heyu Tire Repairs Co., Ltd. , http://www.wheel-weight.com
Ou Ke frequency changer dredging boat in the application