First of all, according to the size of the gas station, forecast the traffic at different times of the day, is more balanced or peak and trough period. On this basis to determine the design of gas island, highlighting the safety, environmental protection and other factors. At present, more and more gas stations provide a variety of oil products, including standard gasoline and diesel oil, blended oil products with additives, or methanol, alcohol and gasoline. Therefore, a machine gun is both economical and efficient solution. The length and diameter of the pipeline are a very important factor when choosing a submersible pump. The number of 90-degree elbows in the oil pipeline and the number of T-joints also determine the choice of submersible pumps of different horsepower. The depth of the tank and tank diameter determine the size of the tanker from the oil machine. Submersible pump on the restrictions than self-priming pump smaller, more flexible in the design and construction. The type of submersible pumps that you decide to use should list the size of the tanker that is required for a standard tanker (40 liters) or a large flow tanker (100 liters or more). At the same time the local altitude and temperature are also factors to be considered when choosing a submersible pump. For different needs, there are many kinds of submersible pump specifications for the user to choose. (See table below) To sum up, the correct choice of submersible pump is mainly based on the actual situation of the gas station site selection, an oil at the same time the number of guns and fuel, the main parameters of reference, including power, flow and so on. According to these parameters to choose different types of submersible pump and the number of its configuration is more than one submersible pump tank, or two tanks with a submersible pump. In determining the outlet flow dispenser, the actual selection, according to the length and diameter of the pipeline, T-joints, the number of elbows, tank diameter, the outlet to the bottom of the tanker to the height of the oil inlet selection, Also consider whether it is an additive-containing oil. At present, Wadeluo Te for the Chinese market, including standard, enhanced, variable frequency and high-power type of 4 types of submersible pump, and will provide data based on user selection, installation services. Power supply power impeller series working medium First of all, according to the size of the gas station, forecast the traffic at different times of the day, is more balanced or peak and trough period. On this basis to determine the design of gas island, highlighting the safety, environmental protection and other factors. At present, more and more gas stations provide a variety of oil products, including standard gasoline and diesel oil, blended oil products with additives, or methanol, alcohol and gasoline. Therefore, a machine gun is both economical and efficient solution. The length and diameter of the pipeline are a very important factor when choosing a submersible pump. The number of 90-degree elbows in the oil pipeline and the number of T-joints also determine the choice of submersible pumps of different horsepower. The depth of the tank and tank diameter determine the size of the tanker from the oil machine. Submersible pump on the restrictions than self-priming pump smaller, more flexible in the design and construction. The type of submersible pumps that you decide to use should list the size of the tanker that is required for a standard tanker (40 liters) or a large flow tanker (100 liters or more). At the same time the local altitude and temperature are also factors to be considered when choosing a submersible pump. For different needs, there are many kinds of submersible pump specifications for the user to choose. (See table below) To sum up, the correct choice of submersible pump is mainly based on the actual situation of the gas station site selection, an oil at the same time the number of guns and fuel, the main parameters of reference, including power, flow and so on. According to these parameters to choose different types of submersible pump and the number of its configuration is more than one submersible pump tank, or two tanks with a submersible pump. In determining the outlet flow dispenser, the actual selection, according to the length and diameter of the pipeline, T-joints, the number of elbows, tank diameter, the outlet to the bottom of the tanker to the height of the oil inlet selection, Also consider whether it is an additive-containing oil. At present, Wadeluo Te for the Chinese market, including standard, enhanced, variable frequency and high-power type of 4 types of submersible pump, and will provide data based on user selection, installation services. Power supply power impeller series working medium
Steel-drawer
Model:XY-P80 XY-p120
Specification:
The Steel-drawer pull out the whole bar, the sidewall because of the role of the pull mouth,promoting rubber tearing, smoothly separate wire and rubber.
Advantages:
1.This equipment adopts double vane pump to supply oil, low working noise, at the same time to ensure the speed and pressure of the drawing cylinder when working, and improve the working efficiency and the service life of the valve.
2.The automatic lifting device is adopted to reduce the labor intensity of workers;
3.The inner guide rail positioning, make sensor reliability retractor positioning highly accuracy, drawing cylinder operation smoothly.
4.Using manual automatic exchange of work,flexible choice.
Automatic Feeding Machine
Model: XY-AL200 / XY-AL500 / XY-AL800 / XY-AL1200
Specification:
Automatic feeding machine mainly through the use of 60 tons of hydraulic pressure as the driving force, can be used to push scrap plastic/ tires with hydraulic column extrusion into reactor, the whole operation process is stable, simple and convenient.
Advantages:
Fully automatic design, save time and manpower;
Highly improve the feeding capacity: manually feeding can only reach 150-170KGS/m³. By using the automatic feeding machine, it could reach to 240-280KGS/m³, which greatly improve the feeding capacity.
Model: XY-C800 XY-C1200
Specifications:
The tyre cutting machine is applied to cut all kinds of rubber blocks and strips,it is good for cutting rubber tyre,rail tyre, rubber strips etc.
Advantages:
1.This machine with large cutting knife,good shearing effect,fast cutting speed and low energy consumption;
2.Small size, easy to move;
3.Adopt hydraulic system, easy to operate and very safe design.
The Whole Tyre Crusher
Model: XY-SH800 / XY-SH1200
Specifications:
At the room temperature, put the tyre or large plastics of rubber into the press directly,which can be crushed into 1-8cm pieces.
Advantages:
1.Compact structure, advanced technology, low energy consumption, high efficiency;
2.The crushing chamber is an open structure,which is convenient for maintenance;
The knife is made of hard alloy steel, which has high hardness, high wear resistance and can be used repeatedly;
3.This machine adopts the hardened reducer, round screen for structural steel wire mesh, large blanking area,which is good for qualified rubber material screening.
Tyre Steel Drawer,Automatic Feeder, Assistant Equipments Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl
3 petrol, diesel, kerosene
0.75 hp three phase 380 volts 50 hertz (550 watts) single phase 220 volts 50 hertz 4 10 methanol (ethanol) +90 petrol
5 10 TAMEETBE MTBE 90 Gasoline
1.5 hp three-phase 380 volts 50 hertz petrol, diesel, kerosene
10 Methanol (ethanol) +90 Gasoline (1120 W) Single phase 220 V 50 Hz 10 TAM E ETBE MTBE 90 Gasoline Gasoline, Diesel, Kerosene
2 hp 220 50 2 20 +80
(1500 Watt) single-phase Fuchs Methanol (Ethanol) gasoline
20 TAM E ETBE MTBE 80 Gasoline, diesel, kerosene
3 hp 380 V 50 Hz 3 20 Methanol (ethanol) +80 Gasoline (2250 W) 20 TAM E ETBE MTBE 80 Gasoline Gasoline, diesel, kerosene
5 hp 380 50 3 20 Methanol (ethanol) +80 Gasoline (3750 watts) Three-phase volts
20 TAM E ETBE MTBE 80 Gasoline Â
3 petrol, diesel, kerosene
0.75 hp three phase 380 volts 50 hertz (550 watts) single phase 220 volts 50 hertz 4 10 methanol (ethanol) +90 petrol
5 10 TAMEETBE MTBE 90 Gasoline
1.5 hp three-phase 380 volts 50 hertz petrol, diesel, kerosene
10 Methanol (ethanol) +90 Gasoline (1120 W) Single phase 220 V 50 Hz 10 TAM E ETBE MTBE 90 Gasoline Gasoline, Diesel, Kerosene
2 hp 220 50 2 20 +80
(1500 Watt) single-phase Fuchs Methanol (Ethanol) gasoline
20 TAM E ETBE MTBE 80 Gasoline, diesel, kerosene
3 hp 380 V 50 Hz 3 20 Methanol (ethanol) +80 Gasoline (2250 W) 20 TAM E ETBE MTBE 80 Gasoline Gasoline, diesel, kerosene
5 hp 380 50 3 20 Methanol (ethanol) +80 Gasoline (3750 watts) Three-phase volts
20 TAM E ETBE MTBE 80 Gasoline
The right submersible pump will produce reasonable benefits
The demand for submersible pumps at modern gas stations is increasing. How to choose a suitable submersible pump when designing and revamping gas stations is a concern of every gas station owner. In general, modern gas stations require more than one machine to fuel more fuel, faster filling and fewer customer queues. At the same time, how to reduce the cost of building maintenance and repair of equipment and equipment to maximize profits is the gas station owners first consideration. Therefore, the choice of a suitable submersible pump has become a focus of increasing concern for many gas station owners.