Where MgOA—the MgO% required for the sinter; After adding 7.6% dolomite to the sinter, the amount of CaO increases, so the corresponding amount of limestone should be reduced accordingly, otherwise the alkalinity should be high. The above is an approximate algorithm.
Bronze Components consists of a variety of alloys: Cu, Zn, Sn, Mn, Al, has a high corrosion resistance and wear resistance. Our CNC machining bronze has the following models: C220, C510, C630, C863, C936. Bronze Components in the sea water, salt water immersion has a very good tolerance. Bronze Components used in the ship, automobile, consumer and industrial sectors. Bronze Components have good electrical conductivity, easy to heat, to ensure safety at the same time with a strong anti-fatigue. Bronze Components has excellent mechanical machining performance and chip performance, can quickly shorten the parts machining time.
Bronze Components Machining Bronze Components, Precision Turned Bronze Parts, Phosphor Bronze Parts, CNC Machining Bronze Parts Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD , https://www.bldcncmachining.com
MgOA'--Sintered MgO% without adding dolomite;
H 2 O—the percentage of H 2 O in the dolomite;
A—the residual amount of 100 kg of the mixture.
For example: set MgOA' = 1.2%. H 2 O = 5%, MgO A = 2.7%, MgO white = 17.63%, A = 85%,
Simple calculation of dolomite loading