EVA Boat Flooring is a new type marine sheet flooring for boat or yacht. Made from marine grade UV-resistant, closed cell EVA foam material, it is waterproof, antibacterial, comfortable, durable and non-skid.
Basically, the boat flooring has two different textures available, which is brushed and embossed. The sheets can be cut into size to fit the shape of boat decking, then peel the adhesive on the backing and stick it.
Normally the EVA marine sheet can be applied on the boat decking, or with a thicker material, it can be applied as helm station pad, seat pad, or coming bolster pad. What's more, it can be also applied on the edge of swimming pool, cause it can provide a good traction and safety when the feet is wet.
Eva Boat Flooring,Eva Yacht Flooring,Marine Sheet,Diy Boat Flooring,Boat Floor Mat,Boat Mat Huizhou City Melors Plastic Products Co., Limited , https://www.melorsfloor.com
Other name: Cold roll forming machine, steel tile roll forming machine.
Components of whole line:
1. De-coiler
2. Shearing Device
3. Forming System
4. Cutting device
5. Run-out Table
6. Electrical Sytem
Process flow:
Decoling--Straightening--Forming--Measure Length---Cutting-- Run-out table
Technological Parameters:
1. Hydraulic Un-coiler
Width of raw material: 1250mm
Max Capacity: 10000kgs
Max out diameter of coil: 1600mm
Inner diameter of coil: 500-600mm
Hydraulic feed and brake
The power of motor: 5.5kw
2. Shearing Device
Shearing way: Manual
The material of blade: Cr12 with Heat treatment HRC60-62
3. Main Forming System
Feeding width: 1219mm
Product width: 1000mm
Height of waves: 37mm
Thickness of sheet: 0.35-0.6mm
Material: GI sheet coil or Colored sheet coil
Roller stations: 18 rows
Material of Roller: C45 steel
Surface of Roller: Chrome plating
Diameter of main shaft: 80mm C45steel, modulation
Main Bearings: 60211
Power of main motor: 5.5kw Servo motor
Forming Speed: 0-15m/min
4. Cutting device
Oil pump station 1set
Motor power of Oil pump station: 4kw
Forced air cooling device available
Cutting mould: 1set
Material of blade: CR12 with heat treatment HRC60-62
Pressure of cutting: 15tons
5. Run-out Table
Frame: Angle bar or steel tube welded
Length: 3m
Quantity: 1 PC
6. Electrical System
PLC and HMI touch Screen
Automatic length measurement
Automatic quantity measurement
Length measurement: Rotary Encoder
Over current protection for control system, aviation plugs
Cutting off type: Paused to cut, moving automatically after cutting.
Power: 380V 50Hz (as per your request)
We also can design and manufacture as per your request!
Contace Person: Jacky (sales manager)
Mobile: +86-15503170286
Advantage of our roll forming machine High quality Lower cost Durableness High efficiency Reliable working Low failure rate Low energy consumption Trouble free after sales service
Export Standard Metal Roofing Sheet Roll Forming Machine
Model NO.: HKY-Metal roofing machine
Thickness Range: 0.2mm-1.0mm
Type: Roll Forming Machine
Trademark: HKY
Transport Package: Export Packing
Specification: 6364mm*1220mm*1400mm
Origin: China
HS Code: 8474801000
Metal roofing sheet roll forming machine