Razor Wire Mesh,Razor Mesh Fence,Welded Razor Mesh,Razor Wire Mesh Fence ANPING COWAN WIRE MESH & MACHINES CO., LTD , https://www.cowanfences.com
Centrifugal jig
The centrifugal jig is a re-election new equipment developed and produced by the North Mine Institute. The traditional jig is difficult to select -74μm material, and in the powerful centrifugal force field of the centrifugal jig, even particles as fine as 10μm can enter the effective sorting state. It has the advantages of selected grain width, strong adaptability, small difference in separation efficiency, low production cost, no environmental pollution, small floor space and large processing capacity. It is also used to treat mud minerals, lean ore and old tailings. Excellent equipment. Application abroad in iron ore, coal mining, placer gold ore, tungsten ore, lead and zinc tailings, flotation tailings and other sulfide minerals have achieved a good indicator.
The centrifugal jig developed by the North Mine Institute has the following characteristics: 1 The separation body adopts the split structure and the rotation weight is light; 2 The concentrated pulsation mechanism generates the pulsating water flow through the outer diaphragm, balances the diaphragm pressure with the pre-stress; Ring protection screen, bed; 4 no room jigging; 5 special sealing structure to solve the water leakage under the screen.
The machine has obtained national patents. The technical parameters of the centrifugal jig are as follows:
Model LT-1 LT750
Screen inner diameter / mm 436 750
Screen size / mm 0.1, 0.3, 0.6 0.1, 0.3, 0.6
Screen speed / (r / min) 0 ~ 815 0 ~ 580
Centrifugal strength / times 0~150 0~133
Stroke / mm 0~10 0~5.6
Rush times / min-1 0~1800 0~1850
Rotating motor power / kW 7.5 55
Pulsating motor power / kW 5.5 7.5
Processing capacity / (t / h) 3 ~ 5 8 ~ 10
The centrifugal jig is suitable for sorting various minerals in fine-grained and coarse-grained grades; it is an ideal equipment for secondary development of old tailings.