Waste Rubber Pyrolysis Plant introduction:
Waste Rubber Pyrolysis Plant can refine the waste rubber into fuel oil by pyrolysis process. The final product will be base oil which can be made into diesel and gasoline.
1.Working process Of waste rubber pyrolysis plant:
First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460 C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.
2. Model of waste rubber Pyrolysis plant:
Model
Reactor size
Material
Handling capacity
Weight
Seaworthy packing
LJ-8
2200*6000mm
Q245R boiler steel plate
5 tons
24tons
2*40HQ
LJ-9
2200*6600mm
Q245R boiler steel plate
8tons
26tons
2*40HQ
LJ-10
2600*6600mm
Q245R boiler steel plate
10tons
30tons
1*40FR+1*40HQ
4. Land requirement: 300sq meters(10m*30m)
5. Exporting Experience:
America:
Brazil, Canada, Colombia, USA,
Middle East:
Dubai, Iran, Jordan, Saudi Arabia, Turkey
Europe:
Albania , Bosnia and Herzegovina
Asia:
Afghanistan, India, Malaysia, Pakistan, Philippines, South Korea, Vietnam, Myanmar
Africa:
Ghana, Mozambique, Zambia
Waste Rubber Pyrolysis Plant Waste Rubber Pyrolysis Plant,Tire Pyrolysis Plant,Waste Rubber Pyrolysis Oil Plant,Waste Tire Oil Pyrolysis Plant Shangqiu Sihai Energy Technology Co., Ltd , https://www.sihaienergy.com
Profile drawing:
No
Specification of the material
1
 Suitable Material
Colored Steel plate, Galvanized steel
2
 Width of the raw material
343mm
3
Thickness
0.4-0.6mm
YX-101 down pipe roll forming machine
1. Brief introduction:
A. Simple structure and beautiful outlook;
B. Easy to setting and operation
C. Little noise and high working efficiency.
2. Main technology parameter:
1. Suitable raw material: 0.5mm colored steel sheet
2. Main motor power: 3Kw; Hydraulic power: 7.5Kw
3. Forming speed: 8-10m/min
4. Number of roll stand: 20 stands
5. Control system: Mitsubishi PLC
6. Material of cutting die: Cr12 mold steel with quench treatment
7. Dimension of the machine: About16000mmx1100mmx1200mm
3. Main Technical Parameter of the down pipe elbow:
1. Control system: Strong electrical current
2. Main motor power: 2.2kw
3. Max bend angle: 900
4. Function: Bend and fasten at the same time
5. Dimension of the machine: 1300 mmx650 mmx1500 mm
6. Speed of bend: 20-25m/ min.
3. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the pyrolysis plant,and buyer will be in charge of the food, accommodation and round air tickets.
Yx101 Round Down Pipe Roll Forming Machine
Model NO.: YX101
Customized: Customized
Advantage: Use Widely
Condition: New
Color: Blue and Yellow
Trademark: SAIBO
Transport Package: No Packing
Specification: CE SGS
Origin: Jiangsu, China
HS Code: 84552210