Continuous Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flow-chat of Continuous Waste Plastic Pyrolysis Plant
Advantages of Continuous Waste Plastic Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Plastic Pyrolysis Plant
NO.
ITEM
Technical Parameter
1
Suitable Raw Materials
Small pieces of Waste tyre,rubber, waste plastic≤5cm
2
Operating Mode
Fully Continuous Operation
3
Structure
Horizontal Type Revolve
4
Loading and discharging
Fully Automatic Feeding and Discharging under High Temperature at Same Time
5
Capacity(24h)
8-20Mt
6
Work Pressure
Slightly Negative Pressure
7
Oil Yield of tyres
40%-45%
8
Reactor Rotational Speed
1R/M
9
Installation Power
110kw
10
Cooling Method
Cycle water
11
Type of Drive
Sprocket Wheel
12
Heating Method
Hot Air
13
Noise dB(A)
≤85
14
Main Reactor Weight (MT)
About 20Mt
15
Total Weight(MT)
About 45Mt
16
Installation Space Required
60m*20m
17
Manpower
2/shift
18
Shipment
5*40HC
19
Delivery time
≤70Days
Continuous Waste Plastic Pyrolysis Plant Continuous Waste Plastic Pyrolysis Plant,Continuous Plastic Pyrolysis Plant,Plastic Pyrolysis Plant Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com
The PQ001 NMR Analyzer was launched in 2008. After years of upgrading, PQ001 has many advantages such as small size, high precision, good repeatability, good stability and excellent cost/benefit performance. Based on these advantages, PQ001 has been widely used in the determination of oil & moisture content and Solid Fat Content, in food & agriculture areas.
Measuring the oil content of seeds is important for two reasons: firstly, for non-destructive measurement of single seeds, to select high oil content specimens for propagation; secondly, for bulk measurement of oil content for trading or processing;
Method:
Solvent extraction techniques are often used for the measurement of oil content of seeds.However, they tend to be time consuming,cumbersome, and require the use of skilled personnel. There is also a financial cost involved in the purchase and disposal of the solvent chemicals.
Measurement of the oil content in seeds was one of the first applications for Nuclear Magnetic Resonance (NMR), as far back as the late 1970s. Since then, NMR has been proven to be suitable for a wide variety of seeds.
NMR has a number of advantages over solvent extraction and NIR:
It can be calibrated to cover a concentration range from 0 to 100%.
Easily calibration.
NMR is very stable over the long term, so calibrations will rarely need to be adjusted.
The measurement time is short.
Basic parameters:
1. Magnet type: permanent magnet;
2. Magnetic field intensity: 0.28±0.05T;
3. Probe coil: Ø40mm;
Functions:
1. Determination of oil /moisture content;
We're looking for long term business partner, if you are instested in being adistributor of Niumag NMR/MRI instruments, pls feel free to contact us.NMR apparatus Oil Content analyser small footprint NMR nuclear magnetic resonance
PRODUCT DESCRIPTION
The PQ001 NMR Analyzer was launched in 2008. After years of upgrading, PQ001 has many advantages such as small size, high precision, good repeatability, good stability and excellent cost/benefit performance. Based on these advantages, PQ001 has been widely used in the determination of oil & moisture content and Solid Fat Content, in food & agriculture areas.
Measuring the oil content of seeds is important for two reasons: firstly, for non-destructive measurement of single seeds, to select high oil content specimens for propagation; secondly, for bulk measurement of oil content for trading or processing;
Method:
Solvent extraction techniques are often used for the measurement of oil content of seeds.However, they tend to be time consuming,cumbersome, and require the use of skilled personnel. There is also a financial cost involved in the purchase and disposal of the solvent chemicals.
Measurement of the oil content in seeds was one of the first applications for Nuclear Magnetic Resonance (NMR), as far back as the late 1970s. Since then, NMR has been proven to be suitable for a wide variety of seeds.
NMR has a number of advantages over solvent extraction and NIR:
It can be calibrated to cover a concentration range from 0 to 100%.
Easily calibration.
NMR is very stable over the long term, so calibrations will rarely need to be adjusted.
The measurement time is short.
Basic parameters:
1. Magnet type: permanent magnet;
2. Magnetic field intensity: 0.28±0.05T;
3. Probe coil: Ø40mm;
Functions:
1. Determination of oil /moisture content;
We're looking for long term business partner, if you are instested in being adistributor of Niumag NMR/MRI instruments, pls feel free to contact us.NMR apparatus Oil Content analyser small footprint NMR nuclear magnetic resonance
Nmr Apparatus Oil Content Analyser Small Footprint Nmr Nuclear Magnetic Resonance
Model NO.: PQ001
Model NO.: PQ001
PRODUCT DESCRIPTION