Metal Sheet C Purlin Profile Machine/Purlin Roll Forming Machine

Model NO.: C Purlin Roll Forming Machine
Type: C Purlin Roll Forming Machine
Model Number: Wlfm-100
Material: Galvanized Steel,Aluzinc Steel
Roller Material: Gcr15 Bearing Steel, with Quenching Treatment.
Web Width: Changeable
Thickness: 2.0-3.0mm
Yield Stress: 235-345 MPa
Max.Forming Speed: 12 M/Min
Main Motor Power: 18.5
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: WILLING INT′L
Transport Package: Sea Worthy Fixed by Wire Rope, Wooden Blocks
Specification: CE Standard, ISO 9001-2008
Origin: China R. P
HS Code: 84552210
C Purlin Channel Truss Furring Cold Forming Machine

Metal Sheet C Purlin Profile Machine/Purlin Roll Forming Machine

Components for the Machine
The roll forming machine includes 4tons manual uncoiler unit, sheet guiding equipment, straightening device, pre-punching device, roll forming system, cutting equipment, hydraulic station, electric controlling system(PLC) and run out supporting table.
 

Metal Sheet C Purlin Profile Machine/Purlin Roll Forming Machine
Technical Parameters
 
Material specification galvanized steel and carbon steel.
Thickness 2.0mm to 3.0mm.
Main Motor Power 18.5 kw.
Hydraulic Power 5.5 kw.
Web Width Changeable.
Yield stress 235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll Forming Speed 12 m/minute.
Cutting Tolerance +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual Uncoiler Max. capacity: 4000kgs.
Coil Inner Diameter 508mm.
Voltage 380V, 3 phase, 50HZ; or as per customer's requirement.
Numbers of Stations 17 stations, with 4+5 straightening rollers.
Type of Cutting Roll-formed and length-set profiled cut.
 
Material of Main Equipment
 
Roller Material GCr15 bearing steel, with quenching treatment.
Active Shaft Material High grade S45C carbon wrought steel, diameter 80mm.
Electric Elements PLC control console, touch screen and transducer, from Mitsubishi, Japan.
Other elements, from Schneider, Germany.
Cutter Blades Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.
Punching Die Cr12 mold steel with quenching treatment.

Working Flow
Uncoiling---Sheet Guiding---Straightening & Levelling---Hole Punching---Measuring Length &Shearing---Roll Forming---Sheet to support table

Standard Equipment of Machine
1) Manual Uncoiler, 4-ton 1 set
2) Infeed Guide 1set
3) Straightening Device  1set
4) Hole Punching Device 1set
5) Pre-cut Device   1set
6) Roll Forming Station 1set
7) Rectification Device 1set
8) Hydraulic Station  1set
9) PLC Control Console 1set
10) Product Support Table 2 sets
11) Other Spare Parts 1 box

Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film; 
3.Spare parts and some small parts packed in plastic tooling box; 
4.All Components Fixed by steel wire with Container.
Metal Sheet C Purlin Profile Machine/Purlin Roll Forming Machine

Company Profile
Metal Sheet C Purlin Profile Machine/Purlin Roll Forming Machine
FAQ

  1. Q:Are you a manufacturer?
  2. A:Yes absolutely. Welcome a lot for your visiting to us.
  3. Q:What's the delivery time?

    A:Normaly will take 60days

  4. Q:Do you have after-sale support?

    A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 

  5. Q:Is there quality control when manufacturing the lines?

    A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.

  6. Q:What's your strength comparing to the other supplier?

    A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.

Separator And Inducer

In order to ensure normal and continuous working of the Centrifugal Pump in gas-containing oil wells, and oil-gas separator is usually installed between the protector and the pump. Sedimentation separator or rotation separator may be used according to the different gas conditions of the oil well. For oil well with high gas content, double-section separator is used in order to ensure effective separation of free gas. Special construction designation separator can be used in high-sand wells and you will get a satisfying result.

Separator And Inducer

Separator Magnetic Separators,Laboratory Flotation Machine,Wet Roll Magnetic Separator,Magnetic Separator

Tianjin RongHeng Group LLC , https://www.wholesale-water-pump.com