Coalescence &Separation Filter Elements
Describe:
The coalescence separation filter element is generally cylindrical in shape, and the coalescence separation filter element is used in the oil-water separation system, mainly separating the oil-water mixture, suspension solution, emulsion solution, etc. The application flow of coalescence separation filter in the system can be divided into solid-liquid separation-demulsification-coalescence-separation. In the system, the number of Coalescence Filter and separation filter is better than that of 3:1, the effect of coalescence is good and the separation speed is fast.
Principle and characteristics:
The surface treated glass fiber or polyester fiber is mainly used as the coalescence medium. The structure of the Filter Material is 0.1 μ m by special design. The filter medium has good coalescence performance. Working process: after the emulsified oil enters the coalescence separator, it first enters the inner filter core from inside to outside, and the small liquid droplet in the dispersed phase changes from small to large. Finally, it falls off on the surface of the coalescence filter core and completes the coalescence process. In the process of flow separation, the larger water drops sink into the sink by gravity, and the small water droplets flow along with the oil to separate the filter elements. The separation filter has hydrophilic effect to block the passage of water. Small water beads collide to form large water droplets, which then settle into the sink again, thus dehydrating the oil.
Different packing sizes should be selected according to different oil-water systems: the smaller the packing size, the larger the specific surface area per unit mass and the larger the contact area with droplets. As a result, the performance of the coalescence filter element is enhanced. Therefore, it is suggested that the separation efficiency of coalescence filter should be taken into account when choosing fiber size, and the pressure drop should be taken into account at the same time.
Range of applications
1. Aviation fuel, gasoline, kerosene, diesel.
2. Cyclohexane, isopropanol, cycloacetone, etc.
3. Turbine oil and other low viscosity hydraulic oil, lubricating oil.
4. Other hydrocarbon compounds.
5. Liquefied petroleum gas, stone tar, benzene, toluene, xylene, cumene, polypropylbenzene and so on.
Coalescence &separation Filter Elements Ptfe Membrane,Separation Filter Elements,Coalescence Filter Elements,Coalescence Filter Henan Sinofiltec Technology Co.,Ltd , https://www.airfilters.pl
The ASE series compacting and pelletizing system combines function of plasticization and pelletizing to one step, applied in the plastics recycling and pelletizing process. ASE system is a reliable and efficiency solution for plastics films, raffias, filaments, bags, woven bags and foaming materials re-pelletizing.
Final productions produced by ASE system are in the form of pellets/ granules, can directly put into the production line for film blowing, pipe extrusion and plastics injection, etc.
Specifications:
Â
Model Name
ASE Series
Recycling Material
Crushed regrinds or flakes of PE/PP/ABS/PS/HIPS/PC etc.
Final Product Shape
Pellets/ Granules
System Composition
Screw loader, single screw extruder, pelletizing device, water cooling unit, dewatering section, conveying blower and production silo
Output Range
120kg/h-1000kg/h
Feeding Device
Screw loader (standard)
Screw Diameter
80mm-200mm (standard)
Screw material
38CrMoAlA nitride steel( SACM-645), bimetallic ( Optional)
Screw L/D
32/1 (depending on features of recycles)
Barrel's Heating
Ceramic heater or Casting Aluminum heater
Barrel's Cooling
Air cooling through fan blowers
Vacuum Degassing
Double vented degassing (Standard)
Pelletizing Type
Water ring die-face hot pelletizing
Voltage Standard
Depending on project's location
Delivery Time
60 days after order takes effect.
Warranty
13 months since date of bill of lading
Technical Service
Project design, suggestion on factory construction, installation and commissioning
Working steps of ASE compacting and pelletizing system
1. Feeding: as standard design, lumps or thick flakes after crushed conveyed into the extruder through screw loader. Motor drives of loading and hauling device cooperate with ABB inverter. Feeding speed of screw loader is fully automatic.
2. Plasticization and degassing: A specialized single screw extruder applied to gently melt the material. The plastic scraps will be well melted, plasticized in a 32D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with some water content.
3. Melt filtration: a regular single-plate/ piston double-station screen changer or non-stop double-plate/ piston four-station can be installed on head of extruder to present significant filtration performance. The requirements on the filter technology depend heavily on the quality of the input material as well as the planned use of granules.
4. Pelletizing: die-face water ring pelletizing system set as the standard granulating method in ASE system. Self-adjusting pelletizing head for the best granulate quality and long uptime thanks to consistently correct blades pressure. RPM of rotatory blades is automatic based on melt extruding pressure. Advanced dewatering vibration sieve combining with horizontal-type centrifugal dewatering present high performance dried pellets.
Â
Main technical parameter:
Machinery Size
Data of single screw extruder
Throughout rate(Kg/hr)
Diameter of screw(mm)
L/D
Motor power (Kw)
ASE80
80
32
55
120-160
ASE100
100
32
110
260-350
ASE120
120
32
132
330-420
ASE150
150
32
185
450-560
ASE180
180
32
250
650-800
ASE200
200
32
315
800-1000
Â
Â
Advantages of ASE plasticizing and pelletizing system
Â
Plasticizing and pelletizing steps in one system, less-labor cost;
Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;
Higher output and lower energy consumption.
Â
Why choose us
Lower investment cost for a high quality and durable machine;
Â
Low energy consumption with high production output;
Overseas installation and training are available;
Machine warranty with spares in stocking and in-time delivery;
Â
Fast machine delivery and installation: AceRetech produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers. The regular delivery time of an AceRetech recycling machine is 60 days.
Ce Standard Plastic Recycling Machine for Crushed PP/PE/ABS/PS/HIPS/PC Regrinds
Model NO.: ASE Series
Voltage: 380V 50Hz or Customized
Electric Components: ABB,Schneider,Ls,Omron, or Customized
Application: Flakes of PE/PP/ABS/PS/HIPS/PC
Capacity Range: 120-1000kg/H
Trademark: ACERETECH
Transport Package: Wooden Pallet
Specification: CE
Origin: Jiangsu Zhangjiagang
HS Code: 8477209000
Ce Standard Plastic Recycling Machine for Crushed PP/PE/ABS/PS/HIPS/PC Regrinds
Pictures of the production line