Ito gasoline generator lubricant selection considerations

The lubricating oil used for the gasoline engine of the gasoline generator set shall be CF grade oil as specified in GB11122. For users in non-cold areas, No. 40 engine oil can be used regardless of the season, which is beneficial for improving the lubrication conditions of gasoline engines, reducing machine wear and extending the service life. For users in severe cold regions, special thickening oil with a lower freezing point should be used. The recommended grades are: When the minimum ambient temperature is -15Â°C, 20W-40 oil should be used. When the minimum ambient temperature is -20Â°C, 15 W-40 oil should be used. When the minimum ambient temperature is -25Â°C, 10W-40 oil should be used. When the minimum ambient temperature is a 30Â°C, 5W-40 oil should be used when the minimum ambient temperature. At -35 Â°C, oil OW-40 should be used.

Gasoline generator lubricant

Lubricant change cycle

(1) The first time the new gasoline engine is replaced, the engine oil should be stored for 60 hours after the completion of the running-in period.

(2) Under normal use, it is replaced every 200h~250h operation. If the conditions of use are good, it can be extended to 300h~350h+ and replaced once. The engine oil should be released under the condition of the gasoline engine heat engine of the generator set , for example, immediately after stop. replace.

(3) Non-mandatory lubrication type high pressure oil pump, before every shift is used, the oil level in the fuel pump governor must be checked. When the oil level is lower than the required standard, it must be added in time; after the oil pump runs for lOOh, it should be replaced in the high pressure oil pump. Oil, clean fuel filter.

Related reading :

Shanghai Ito Power Co., Ltd. Main : Ito Gasoline Generator , Ito Diesel Generator , Ito Small Pump , Ito Digital Generator , Ito Electric Welding Machine

JLQZ-1320/1550/2000mm Paper Cutting Machine

NO. Items Parameter Remark

1 Machine ITEM No. JLQZ-1320mm/1550mm/2000mm

2 Total power 40KW

3 Voltage 380V/220V (Can be customerized )

4 SAW Body type imported saw head, thickness11.5mm

5 Main Motor Power 30KW

6 Suction fan power 5.5KW

7 Inverter 30KW

8 Maximum cutter diameter 1.32m/1.55m/2m

9 Minimum diameter cutter 0.46m

10 Maximum cutter width 1-3.8m

11 Cutting speed 3-6MIN/ROLL

12 Weight 6T

13 Equipment size 4.5m(L)*3m(W)*2.5m(H)

Craft Paper Roll Cutting Machine
Paper Roll Cutting Machine,Craft Paper Roll Cutting Machine,Roll Cutting Machine For Wrapping Paper,Automatic Paper Roll Cutting Machine
JIALONG PACKAGING MACHINERY CO.,LTD , https://www.jlcartonmachine.com