seismic accessories metal parts, Seismic Accessories Metal Parts seismic accessories metal parts Hebei Qierjie New Energy Technology co., Ltd , https://www.qejfastener.com
· In January, domestic vehicles recalled 340,000 vehicles, and Mitsubishi recalled nearly half of the total.
Recently, according to the recall announcement announced by the official website of the AQSIQ, Geshi Automobile has sorted out the domestic automobile recalls in January 2018. The results show that in January this year, there were 15 announcements concerning the recall of automobiles, involving 13 automobile companies. A total of 343,823 vehicles were recalled. The Takata problem airbag incident that caused a large-scale domestic recall wave in the second half of last year reappeared this month. A total of five recalls caused by the Takata problem airbag directly caused by the damage of the gas generator casing caused the debris to fly out, recalled the vehicle. 36,667 vehicles, accounting for 10.66% of the total recall.
In addition to airbags, there are two recalls due to engine problems, involving 35 brands of Mitsubishi Motors and Southeast Auto, and a fuel tank for BMW Brilliance 316i, 316 Li, 320i, 320Li, 328i, 328Li, and 335Li. The cracking of the upper cover caused fuel leakage when the vehicle was full of fuel, and the number of recalls was 16,504.
Mitsubishi Motors, the number of recalls of 143,507 vehicles in two batches, became the most recalled brand in January, accounting for 41.7% of the total recall. Among them, because the waterproofness of the sheath of the brake caliper shaft is insufficient, the parking brake force is reduced, and the engine transmission belt problem causes the transmission belt to fall off, which causes the steering assist failure to account for the majority of the recalls, involving the Outlander EX (import) , ASX Jin Xuan (import), Lancer EX (import) and other models.
The domestic car recalls in January are as follows:
South East Auto recalled 6,477 Mitsubishi wing gods due to engine transmission problems
Recall range:
Since April 27, 2018, the 2010-2012 part of the Southeastern Mitsubishi Wingshen 2.0L passenger car, which was produced between July 10, 2009 and August 30, 2013, was recalled, totaling 6,477 vehicles.
Reason for recall:
The engine transmission belt automatic tensioner mounting platform of some vehicles within this recall range may be damaged due to the shape and cause the transmission belt to fall off, resulting in failure of the steering assist. Continued driving may cause the battery to run out and the engine to overheat, which may cause safety hazards.
solution:
Southeast (Fujian) Automobile Industry Co., Ltd. will replace the qualified engine belt automatic tensioner for vehicles within the recall range to eliminate safety hazards. Southeast (Fujian) Automobile Industry Co., Ltd. will notify the owner of the vehicle by means of a registered letter, etc., and the authorized service outlets will also contact the relevant owners to arrange the recall. Users can call the Southeast (Fujian) Automotive Industry Co., Ltd. service hotline 400-661-1666 (mobile phone, landline) for consultation, or visit the website of Southeast (Fujian) Automotive Industry Co., Ltd. () for more information.
Airbag hidden danger Dongfeng Honda recalled 100 cars
Recall range:
Since March 1, 2018, some of the imported 2013 Sodexo series cars, which were produced between April 26, 2012 and June 29, 2012, will be recalled. According to the company's statistics, there are 100 vehicles in mainland China.
Reason for recall:
The front passenger airbags of some vehicles in this recall range were equipped with Takata's ammonium nitrate gas generator without desiccant. When the airbag is deployed, the gas generator of the airbag may be abnormally damaged, causing debris to fly out and injuring the inside of the vehicle, posing a safety hazard.
solution:
Dongfeng Honda Automobile Co., Ltd. will replace the front passenger airbag gas generator for the vehicles within the recall range to eliminate defects. Relevant users should drive carefully to avoid collisions. The user should contact the dealer for repair as soon as possible after the recall operation begins.
Dongfeng Honda Automobile Co., Ltd. will notify customers by registered mail, etc. Dongfeng Honda Automobile Co., Ltd. special sales service store will notify the owner of the target by SMS or telephone. Users can obtain information about the recall by dialing Dongfeng Honda Automobile Co., Ltd. hotline 800-880-9899 (fixed line), 400-880-6622 (mobile phone, fixed line).
Mercedes-Benz recalled 2,151 GLE SUV and GLS SUV due to sound insulation cotton and bolting problems
Recall range:
Since February 2, 2018, part of the imported 2015-2017 GLE SUV and GLS SUV series cars, which were produced between May 13, 2015 and June 10, 2016, were recalled. According to the company's statistics, there are 2,151 vehicles in mainland China. details as follows:
(1) Part of the imported 2017 GLE SUV and GLS SUV series cars produced during the period from May 4, 2016 to June 10, 2016, totaling 2,131 vehicles;
(II) Part of the imported 2015-2016 GLE SUV series cars produced from May 13, 2015 to July 6, 2015, totaling 20 vehicles.
Reason for recall:
In the above range (1), part of the vehicle does not meet the requirements due to the manufacture of the soundproof cotton under the instrument panel. The soundproof cotton may appear in the lower part of the front windshield and block the VIN code. In addition, excess sound insulation cotton may affect the bonding of the front windshield. If it collides with the front passenger airbag, the front windshield may not be able to support the airbag, increasing the risk of injury to the front passenger and posing a safety hazard.
In some of the above-mentioned range (2), due to the deviation of the relative position between the nut and the end plate during the welding process, the bolt connection at the end of the right side seat belt may not be firm. When the vehicle collides with safety and high load, unqualified bolted connections may fail, increasing the risk of injury to the right side of the rear passengers, posing a safety hazard.
solution:
For the above scope (1) Mercedes-Benz (China) Automobile Sales Co., Ltd. will inspect and remove excess sound insulation cotton for the vehicles within the scope of the recall. If the adhesion of the front windshield has been affected, the front windshield shall be repaired. To eliminate defects.
For the above range (2) Mercedes-Benz (China) Automobile Sales Co., Ltd. will check the bolt connection status of the rear right side belt at the rear of the vehicle within the recall range, and if necessary, repair it to eliminate the defect.
Mercedes-Benz (China) Automobile Sales Co., Ltd. will notify customers by registered mail. Users can obtain information about this recall by calling the Mercedes-Benz (China) Automobile Sales Co., Ltd. hotline 400-818-1188.
Airbag hidden danger Dongfeng Honda recalled Aili ç»…, think Platinum 25,483
Recall range:
Since March 1, 2018, a total of 25,483 vehicles have been recalled, including a total of 25,483 vehicles, as follows:
(1) The 2013 ELYSION cars produced between April 19, 2012 and August 26, 2013, totaling 15,748 vehicles;
(II) The 2013 SPIRIOR cars produced between May 16, 2012 and October 23, 2013, totaling 9,735 vehicles.
Reason for recall:
The passenger-side front airbag of the vehicle in this recall range is equipped with an ammonium nitrate gas generator without a desiccant produced by Takada. When the airbag is deployed, the gas generator of the airbag may be abnormally damaged, causing debris to fly out and injuring the inside of the vehicle, posing a safety hazard.
solution:
Dongfeng Honda Automobile Co., Ltd. will replace the passenger side front airbag gas generator for vehicles within the recall range to eliminate safety hazards. Dongfeng Honda Automobile Co., Ltd. will send the "Defective Car Product Recall Notice" to the owner of the target by means of a registered letter, etc. The special sales service shop of Dongfeng Honda Automobile Co., Ltd. will notify the owner of the target by SMS or telephone. Users can call Dongfeng Honda Automobile Co., Ltd. customer service hotline 800-880-9899 (fixed line), 400-880-6622 (mobile phone, fixed line) for consultation.
Due to the control harness hidden danger, Beijing Hyundai recalled a new Tucson 63,852 vehicles
Recall range:
Since February 1, 2018, a total of 63,852 new Tucson cars will be recalled between April 1, 2017 and October 25, 2017.
Reason for recall:
Due to the assembly problem, the parking brake pedal arm and the control harness may interfere with the parking brake pedal when the vehicle is within the scope of this recall. After using for a period of time, the control harness may be worn out, causing the instrument panel fault light to illuminate and the vehicle to fail to start. In extreme cases, the control harness may be short-circuited, posing a safety hazard.
solution:
Beijing Hyundai Motor Co., Ltd. will inspect and repair vehicles for free within the scope of the recall. If the control harness has worn out, the control harness will be replaced free of charge to eliminate potential safety hazards. Beijing Hyundai Motor Co., Ltd. will notify the relevant owners through registered dealers by registered mail. Users can call the customer service hotline 400-800-1100 for consultation.
Double-clutch transmission problem Beijing Hyundai expands recall of new Tucson 33,722 vehicles
Recall range:
Since February 1, 2018, a total of 33,722 new Tucson vehicles equipped with a 7-speed dual-clutch transmission, which was produced between June 1, 2016 and August 23, 2016, will be recalled.
Reason for recall:
Vehicles within this recall range may experience delays in vehicle start-up due to the presence of the Dual Clutch Transmission Control Unit (TCU) program. If the accelerator pedal is continuously stabilized for 1.5-2.0 seconds, the vehicle will start to accelerate and the vehicle will return to normal. However, if the accelerator pedal is repeatedly depressed, the vehicle may not accelerate and there is a safety hazard.
solution:
This recall is an enlarged recall of the recall of the new Beijing Tucson Automobile recalled by Beijing Hyundai Motor Co., Ltd. on September 30, 2016. Due to product traceability reasons, Beijing Hyundai Motor Co., Ltd. decided to expand the scope of the recall. Beijing Hyundai Motor Co., Ltd. will notify the relevant owners through registered dealers by registered mail. Users can call the customer service hotline 400-800-1100 for consultation.
Electric power steering gear hidden danger Geely recalls 40,068 Bray GC-9
Recall range:
Since January 26, 2018, a total of 40,068 vehicles have been recalled for the production of the Borui GC-9 vehicles from April 1, 2015 to October 28, 2016.
Reason for recall:
Vehicles within this recall range, due to the problem of durable corrosion of the electric power steering harness harness connector pins, may cause some vehicles to report the fault code after long-term use. In extreme cases, the vehicle's electronic steering assist may fail, posing a safety hazard.
solution:
Zhejiang Geely Automobile Co., Ltd. will install a rubber pad between the electric power steering gear housing and the motor involved in the vehicle for free, and apply grease to the wire harness terminal to eliminate safety hazards. Zhejiang Geely Automobile Co., Ltd. will entrust Geely Automobile Special Service Station to notify the relevant owners through registered mail, telephone, SMS, etc., and ask the relevant owners to go to the nearest Geely Automobile Special Service Station for free maintenance. Users can call the customer service hotline 400-886-9888 via landline or mobile phone to get the information about this recall.
Rear brake caliper problem Mitsubishi recalled Outlander 51,596
Recall range:
Since April 27, 2018, some of the imported 2013-2016 Outlander series cars, which were produced between November 15, 2012 and January 28, 2016, were recalled. According to the company's statistics, there were 51,596 vehicles in mainland China.
Reason for recall:
Some vehicles in this recall range have insufficient waterproof performance due to the sheath of the rear brake caliper shaft, which will cause the parking brake center shaft to rust after water intrusion. The rust between the shaft and the body causes the jam, which causes the parking brake force to decrease, and the vehicle in the parking state may slip, posing a safety hazard.
solution:
Mitsubishi Motors Sales (China) Co., Ltd. will inspect the vehicles within the scope of the recall. If the parts before the improvement are installed, it is necessary to confirm the rust of the shaft and dispose of it as follows: if the shaft is stuck or the shaft When the rust has developed into the caliper, replace the rear brake caliper with the improved parts; if the rust of the shaft does not develop into the caliper, replace the sheath assembly with the improved product after rust removal to eliminate defect.
Mitsubishi Motors Sales (China) Co., Ltd. will notify customers by registered mail. Users can obtain information about the recall by logging in to Mitsubishi Motors Sales (China) Co., Ltd. website or by calling Mitsubishi Motors Sales (China) Co., Ltd. hotline 4009773030 (fixed line, mobile phone).
Ford recalls F-150 Raptor 363 cars due to door bolt problem
Recall range:
Since February 28, 2018, part of the imported 2015-2017 F-150 Raptor series car, which was produced between March 12, 2014 and December 31, 2016, was recalled. According to the company's statistics, there are 363 vehicles in mainland China.
Reason for recall:
Due to manufacturing reasons, some of the vehicles in this recall may have water seepage conditions. In low temperature environment, the side door latch will freeze, which may cause the locking mechanism to become stuck after the door is opened. In addition, some of the vehicles may be twisted due to improper installation, which may also cause the door bolts to become stuck. In some cases, the latching of the door bolt caused by the above reasons, under the combined action of the friction between the latch latch and the resistance of the door seal strip, will result in the door being unable to be properly locked, posing a safety hazard.
solution:
Ford Motor (China) Co., Ltd. will install a waterproof shield and check the bolt pull wire for the vehicle door bolts in the recall range, and carry out corresponding repair according to the inspection results to eliminate the defects. Stock vehicles will be sold after missing defects.
If the relevant user finds that the door is difficult to open or it is difficult to lock the door when the door is closed, or the door pops up when trying to close the door many times, or if it takes several efforts to lock the door bolt, contact the authorized dealer in time to carry out the vehicle. Related checks. The user should contact the dealer for repair as soon as possible after the recall operation begins.
Ford Motor (China) Co., Ltd. will notify customers by registered mail. Users can obtain information about this recall by calling Ford Motor (China) Co., Ltd. Hotline 800-810-0740.
Parking brake, engine and sunroof hidden danger Mitsubishi recalled Outlander, Lande EX Jinjie, ASX Jinxuan and Lancer EX81, 911
Recall range:
Since April 27, 2018, the following vehicles have been recalled. According to the company's statistics, there are 81,911 vehicles in mainland China.
(1) Part of the 2014 annual Outlander series of cars produced during the period from July 8, 2014 to December 17, 2014, totaling 8,596 vehicles.
(II) Some imported 2008-2012 Outlander EX Jinjie series vehicles produced during the period from June 25, 2008 to November 15, 2011, totaling 30,243 vehicles; July 7, 2010 to November 1, 2011 During the period of production, part of the imported ASX Jinxuan series of cars from 2011 to 2012, a total of 16,542 vehicles; part of the imported 2009 Lancer EX series cars produced during the period from October 3, 2008 to July 21, 2009, totaling 391 vehicles . A total of 47,176 vehicles.
(III) Partially imported 2007-2010 Outlander EX Jinjie series vehicles produced during the period from November 23, 2006 to October 12, 2009, totaling 25,748 units; October 3, 2008 to July 21, 2009 During the period of production, part of the 2009 Lancer EX series cars were imported, totaling 391 vehicles. A total of 26,139 vehicles.
Reason for recall:
The function of automatically adjusting the gap between the brake shoes in the parking brake device may be invalid due to the manufacturer's manufacturing reasons in the above range (1). When the wear of the brake block continues to increase, the parking brake force will decrease. In severe cases, the vehicle in the parked state may slip and there is a safety hazard. Mitsubishi Motors Sales (China) Co., Ltd. will inspect the vehicles within the scope of the recall. If the brake calipers are modified before and after, the pistons in the rear brake calipers will be replaced with the improved products to eliminate the defects. .
The engine transmission belt automatic tensioner mounting platform of some vehicles in the above range (2) may be damaged due to the shape and cause the transmission belt to fall off, resulting in failure of the steering assist. Continued driving may cause the battery to run out and the engine to overheat, which may cause safety hazards. Mitsubishi Motors Sales (China) Co., Ltd. will inspect the vehicles within the scope of the recall. If it is an automatic tensioner before the improvement, it will be replaced free of charge to eliminate the defects.
In some of the above-mentioned range (3), due to the selection of the resin material of the sunroof frame, the adhesion to the sunroof glass during use is reduced. After long-term use, the sunroof glass will be peeled off from the outer frame. In severe cases, the sunroof glass may fall off during the running of the vehicle, posing a safety hazard. Mitsubishi Motors Sales (China) Co., Ltd. will replace the improved sunroof glass assembly for vehicles within the scope of the recall to eliminate defects.
solution:
For the above range (1) Mitsubishi Motors Sales (China) Co., Ltd. will inspect the vehicles within the scope of the recall. If the brake calipers are modified before and after, the pistons in the rear brake calipers are replaced with improvements. Products to eliminate defects.
For the above range (2) Mitsubishi Motors Sales (China) Co., Ltd. will inspect the vehicles within the scope of the recall. If it is an automatic tensioner before the improvement, it will be replaced free of charge to eliminate the defects.
For the above range (3) Mitsubishi Motors Sales (China) Co., Ltd. will replace the improved sunroof glass assembly for vehicles within the recall range to eliminate defects.
Mitsubishi Motors Sales (China) Co., Ltd. will notify customers by registered mail. Users can call Mitsubishi Motors Sales (China) Co., Ltd. website to call Mitsubishi Motors Sales (China) Co., Ltd. hotline 4009773030 (fixed telephone, mobile phone can) to obtain the relevant information of this recall.
Airbags hidden danger Toyota recalled Lexus IS, GX series 2,125
Recall range:
Since April 30, 2018, part of the 2013 Lexus IS and GX series cars imported from January 7, 2013 to December 25, 2013 have been recalled. According to the company's statistics, there are 2,125 vehicles in mainland China. . details as follows:
Part of the imported 2013 Lexus IS250C vehicles produced between May 22, 2013 and November 29, 2013, totaling 31 vehicles;
Part of the imported 2013 Lexus GX400, which was produced between January 7, 2013 and December 25, 2013, totaled 2,094.
Reason for recall:
The airbags of some of the vehicle co-pilots in this recall range were equipped with Takata's ammonium nitrate gas generator without desiccant. When the airbag is deployed, the gas generator may be abnormally damaged, causing debris to fly out and injuring the inside of the vehicle, posing a safety hazard.
solution:
Toyota Motor (China) Investment Co., Ltd. will replace the passenger seat air bag assembly or gas generator for vehicles within the recall range to eliminate defects. Relevant users should drive carefully to avoid collisions. The user should contact the dealer for repair as soon as possible after the recall operation begins. Toyota Motor (China) Investment Co., Ltd. will notify customers by registered mail. Users can obtain information about the recall by calling the Toyota Motor (China) Investment Co., Ltd. hotline 800-810-2772 or 400-810-2772.
The airbag has hidden seven Model S recalls
Recall range:
Since January 15, 2018, part of the imported 2013 Model S series cars, which were produced between September 24, 2013 and December 21, 2013, were recalled. According to the company's statistics, there are 7 vehicles in mainland China.
Reason for recall:
The airbags of some of the vehicle co-pilots in this recall range were equipped with Takata's ammonium nitrate gas generator without desiccant. When the airbag is deployed, the gas generator may be abnormally damaged, causing debris to fly out and injuring the inside of the vehicle, posing a safety hazard.
solution:
Extension Speed ​​Auto Sales (Beijing) Co., Ltd. will replace the modified airbags for vehicles within the scope of the recall to eliminate defects. Relevant users should drive carefully to avoid collisions. The user should contact the dealer for repair as soon as possible after the recall operation begins. Extension Speed ​​Auto Sales (Beijing) Co., Ltd. will notify customers by registered mail. Users can call the Speedo Car Sales (Beijing) Co., Ltd. hotline 400-910-0707 to obtain the relevant information of this recall through mobile phone or fixed line.
Airbag hidden danger Jaguar Land Rover recalled Jaguar XF 8,952
Recall range:
Since January 19, 2018, some of the imported Jaguar XF series cars imported from June 19, 2012 to October 1, 2013 have been recalled. According to the company's statistics, there are 8,952 vehicles in mainland China.
Reason for recall:
In some vehicles within the scope of this recall, the front airbags are equipped with high-altitude ammonium nitrate gas generators produced by Takata, and the gas generators may be abnormally damaged when the airbags are deployed. Out of the injury, there are safety hazards in the car.
solution:
Jaguar Land Rover (China) Investment Co., Ltd. will replace the modified airbags for vehicles within the scope of the recall to eliminate defects. Relevant users should drive carefully to avoid collisions. The user should contact the dealer for repair as soon as possible after the recall operation begins. Jaguar Land Rover (China) Investment Co., Ltd. will notify customers by registered mail. Users can call Jaguar Land Rover (China) Investment Co., Ltd. hotline 400-820-8955 via mobile phone or fixed line to get the information about this recall.
Airbags are hidden in FAW-Volkswagen, Volkswagen recalled Audi Q3 and Sharon 512
Recall range:
The following vehicles have been recalled since January 31, 2018, for a total of 512 vehicles.
(1) FAW-Volkswagen Automotive Co., Ltd.: Some of the domestic 2017 Audi Audi Q3 cars produced during the period from November 7, 2016 to December 3, 2016, totaling 467 vehicles.
(2) Volkswagen (China) Sales Co., Ltd.: Part of the imported 2017 Sharan Automobile, which was produced between September 13, 2016 and September 28, 2016, totaling 45 vehicles.
Reason for recall:
Some vehicles within the scope of this recall, due to the manufacturer's manufacturing reasons, poor welding between the pressure vessel and the igniter of the gas generator in the front passenger airbag may cause the airbag to be under-inflated during deployment, resulting in the occupant The protection is reduced and there are potential safety hazards.
solution:
FAW-Volkswagen Automotive Co., Ltd. and Volkswagen (China) Sales Co., Ltd. will replace the front passenger side airbag module for vehicles within the scope of the recall to eliminate safety hazards. FAW-Volkswagen Automotive Co., Ltd. and Volkswagen (China) Sales Co., Ltd. will notify users by registered mail, etc., and the authorized dealers of the above two companies will also contact the relevant users for maintenance. Users can also call the FAW-Volkswagen Co., Ltd. hotline 400-817-1666, Volkswagen (China) Sales Co., Ltd. hotline 400-188-0888 to get the details of the recall.
Fuel tank leakage problem BMW Brilliance recalled BMW 3 Series 16,504
Recall range:
Since April 2, 2018, a total of 16,504 BMW Brilliance 316i, 316 Li, 320i, 320Li, 328i, 328Li and 335Li vehicles have been recalled from September 1, 2015 to October 31, 2015.
Reason for recall:
Vehicles within the scope of this recall, due to fuel tank supplier manufacturing reasons, after long-term use, the processing port cover on the upper part of the fuel tank may crack, resulting in fuel leakage when the vehicle is full of fuel, there is a safety hazard.
solution:
BMW Brilliance Automotive Co., Ltd. will replace fuel tanks for free within the scope of the recall to eliminate safety hazards.
As an emergency disposal plan, it is recommended that the user do not exceed 3/4 of the fuel gauge when filling the fuel, so as not to increase the damage caused by the fuel tank load. If the user smells the fuel or observes a fuel leak, he should contact an authorized BMW dealer for repair as soon as possible.
The recall was carried out under the circumstances of the AQSIQ initiated defect investigation. For some time, the AQSIQ Defective Product Management Center received complaints from consumers about this issue. After receiving the complaint, AQSIQ immediately deployed the Defective Product Management Center to conduct defect investigation and evaluation on the above issues. Affected by the investigation, BMW Brilliance Automotive Co., Ltd. decided to take recall measures to eliminate potential safety hazards.
BMW Brilliance Automotive Co., Ltd. will contact the users within the scope of the recall by means of registered mail and direct contact with BMW authorized dealers to arrange free maintenance. Users can call the BMW Service Hotline 400-800-6666 (either fixed or mobile to call) to learn more about the recall.