Introduction
Titanium alloys are widely used across various industries due to their excellent properties, including high strength-to-weight ratio, good corrosion resistance, and biocompatibility. They find applications in automotive, consumer electronics, military, aerospace, medical, marine, and sports equipment sectors.
Grade 7 Ti-0.15Pd alloy is a special type of titanium alloy that offers enhanced resistance to corrosive environments, especially in reducing acids and hot halide media. The addition of palladium significantly improves its corrosion resistance. This alloy is similar to Grade 2 titanium in terms of mechanical properties, offering moderate strength and good ductility, making it suitable for a wide range of industrial uses.
This section provides a detailed overview of the Grade 7 Ti-0.15Pd alloy, covering its chemical composition, physical, mechanical, and thermal properties.
Chemical Composition
The chemical composition of Grade 7 Ti-0.15Pd alloy is listed in the table below.
Element |
Content (%) |
Iron, Fe |
0.3 |
Oxygen, O |
0.25 |
Palladium, Pd |
0.12–0.25 |
Carbon, C |
0.08 |
Nitrogen, N |
0.03 |
Hydrogen, H |
0.015 |
Other, total |
0.4 |
Titanium, Ti |
Balance |
Physical Properties
The following table lists the physical properties of Grade 7 Ti-0.15Pd alloy.
Properties |
Metric |
Imperial |
Density |
4.51 g/cm³ |
0.162 lb/in³ |
Mechanical Properties
Below are the mechanical properties of Grade 7 Ti-0.15Pd alloy:
Properties |
Metric |
Imperial |
Tensile Strength |
485 MPa |
70,343 psi |
Yield Strength |
350 MPa |
50,763 psi |
Elastic Modulus |
103 GPa |
14,938 ksi |
Elongation in 50 mm (A5) |
28% |
28% |
Hardness (HV) |
150 |
150 |
Thermal Properties
The thermal properties of Grade 7 Ti-0.15Pd alloy are as follows:
Properties |
Metric |
Imperial |
Thermal Conductivity (at room temperature) |
20.8 W/mK |
144 BTU in/hr.ft².°F |
Shipping mail box
Shipping mail box,Custom Cardboard Boxes Logo,Custom Shipping Box Sizes,Shipping Boxes
Yutian Jifu Paper Products Co., Ltd. , https://www.yutianjifu.com