Cixi Air-Fluid Teflon Washer Fitting is a new featured products introduced by Cixi Air Fluid Company ,which can be interchanged with BSPP ,BSPT & NPT Threads ,Non Leakage.
Teflon Washer Metal Push in Fittings Teflon Washer Metal Push In Fittings, Pneumatic Metal Teflon Washer, Teflon Washer Metal Ningbo Air-Fluid Pneumatic Components Co., Ltd , http://www.air-fittings.com
Cyclic duration factor: 20%;
Rated input power of welder: 2x100KVA;
Subprime no-load voltage: 8V;
Maximum short-circuit current: 32KA;
Welding speed: 100 rows/minute;
Maximum mesh width (transverse bar length): 500mm;
Maximum welding width: 450mm;
Minimum longitudinal distance: 50mm;
Power cable specification (copper wire cable): ≥50mm2;
Ground cable specification (copper wire cable): ≥25mm2;
Air switch capacity: 300A;
Pipe diameter of water inlet and outlet: G1½;
Pipe diameter of air inlet: φ14mm;
Weight of welding machine: 1,500kg;
Boundary dimension: 30m×2.5m×3.2m (length × width × height);
Maximum welding capability (mm): Φ6*Φ8
Maximum welding points: 10 points
Welding material: 4-6mm common round steel and screwed pipe
Feeding mode: Longitudinal bar preform and transverse bar straightening material
Â
Acl Wall Panel Mesh Welding Machine
Model NO.: GWC-C-500
Trademark: XINZHOU
Transport Package: Wood
Specification: A
Origin: Ningbo China
HS Code: 8515219090
Supply voltage: three-phase, AC380V±10%;
Teflon Washer with the most uprising characteristics as below:
A.Resistant to many chemicals, includes ozone, chlorine, acetic acid, ammonia, sulfuric acid and hydrochloric acid.
B.Weather and UV resistance
C.Non Stick::Very few solid substances will permanently adhere to a Teflon coating. While tacky materials may show some adhesion, almost all substances release easily.
D. Outstanding performance at extreme temperatures to meet your special temperatures 'demands: it can temporarily withstand temperatures of 260C and cryogenic temperatures of -240C and still with the same chemical properties. Its initial melting point of 342C (+- 10C) & second melting pint at 327C (+- 10C).
E:The Teflon Washer Series Fittings with Class-A O-ring ,The FKM O-RING available for special required .