With rich experience and professional mold designing and making team, we have produced many different kinds of Bearing Housing with different shapes. Just give us your Bearing House drawing, then we can produce the custom bearing housing for you precisely. Our bearing house is with high quality to meet many international standards. We have explored many new stamped bearing blocks successfully with our customers, so let's work together. OEM/ODM & Other Bearing Housing Bearing House,Housed Bearings,Oem Bearing Housing,Ball Bearing Housing Qufu Zhuoyue Heavy Industry Science&Technology Co., Ltd , https://www.zhuoyueindustry.com
1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization _ being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.
Demark pet preform injection systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 72 cavities.
Demark pet injection systems offer:
1. Faster cycles
2. Reduced energy consumption
3. Smaller footprint
4. Improved repeatability
5. Rapid set-up
Features:
1. Two state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficient cooling time and shorter cycle time;
3. High quality parts and accessories from world famous brands enable higher speed and precision;
4. Special screw design increases torque while brings down shear force to avoid degradation;
5. Accumulator from world reputable manufacture increases performance while brings down power consumption;
Soft and flexible Platens
Flexible platens distribute clamp force across the platen face evenly
Flexible platens:
1. Allow for 20% around lower clamp tonnage
2. Decrease mold wear
3. Improve part quality
Injection Units
Demark systems offer both reciprocating screw (RS) and two-stage injection units. RS units offer the performance required for many PET applications while two-stage is appropriate for higher throughput applications.
Micro PC Controls
PC-based controls manage all functions of our PET production systems, with optional packages to integrate auxiliaries and downstream part handling equipment.
Revelant advantages as following:
1. Faster cycle times
2. Improved shot-to-shot repeatability
3. Remote connectivity through ServiceNetLink
4. Control of molding system and auxiliaries from a single interface
Linear Bearings
Linear bearings support the moving platen directly on the machine base. This design reduces mold wear by improving platen alignment and perpendicularity, and provides a grease free molding environment.
48 Cav. Pet Preform Injection Molding Machine (iPET300/3500)
Model NO.: iPET300/3500
Trademark: DEMARK
Transport Package: WOODEN PACKAGE
Specification: 19200pcs/hr, 48 cav, 9s, 15g, 260T/3500g
Origin: CHINA
HS Code: 84771010
Demark 48 cavities pet preform injection molding machine@(injection moulding machine@injection moulding system@injection molding system@) uses a new part cooling and handling system, which features: