Face Milling Cutter,side and face milling cutter,indexable face mill,indexable side milling cutter,indexable face mill cutter,round insert face mill,side and face cutter SICHUAN JOJO TOOLS CO., LTD , https://www.jojo-tools.com
Item
Model Unit
BOD-5
BOD-10
BOD-15
BOD-20
BOD-30
Capacity
Tons / day
3
5
10
15
30
Recovery Rate
%
88 ~ 98
Working Pressure
MPa
≤0.4
Temperature Range
ºC
80 ~ 430
Working noise
dB(A)
≤85
Power supply
380V / 3 Phase / 50Hz (or as per your needed)
Electrical Power
kW
18
20
24
28
30
Cooling Method
Water Circulation Cooling
Heating Energy Source
By Natural gas, finance oil, coal, etc…
Weight
Tons
6
8.5
16
29
37
Manufacture Time
Days
25
30
35
35
45
RECOVERY RATE
Base oil: 85%~88% (index same as SN150~SN200)
Gasoline: about 3%
Diesel: about 3%~4%
Oil residue: 6%~8%
No
Item
Unit
Technical data
Light base oil
Medium/Heavy base oil
1
Viscosity (40ºC)
mm²/s
16~32
28~72
2
Viscosity index
≥99
110
3
Appearance
Transparency
Transparency
4
Color index
ASTMD1500
≤1
≤2
5
Pour point
ºC
-15
-10
6
Water content
% W/W
≤0.05
≤0.05
7
Flash point open
ºC
≥180
≥210
8
Ash content
% W/W
0.005
0.005
9
Carbon residue
% W/W
≤0.13
≤0.13
10
Corrosion copper, 100ºC 3h
Qualified
Qualified
11
Acidity
mgKOH/g
≤0.05
≤0.05
Waste Engine Oil Decolorization System
Model NO.: BOD-30000
Origin: Chongqing, China
HS Code: 90278099
Waste Oil Distillation & Converting System Series BOD
(Converting waste Engine oils to Base Oil)
Economically Advantageous
The price of purchasing regenerated oil is typically less than 80% of new oil and can be as low as 50%. There is no downtime when reclaiming on energized equipment. Replacement with new oil and hot oil flush requires equipment switch off.
Control of Strategic Asset is Retained
Oil in use is an asset. Use of regeneration technology removes dependence on oil companies to deliver replacement supplies and isolates from wildly fluctuating external market prices.
Extended Life of Expensive Capital Equipment
In situ treatment of transformers dramatically reduces the aging effects on the transformer, slowing down the processes that destroy the asset.
II. Brief Description
With the rapid development of refining industry from waste plastics, waste rubber, and waste oils, the produced fuel oils by these industries are more and more widespread applied and adopted, and have been penetrated into all areas of the national economy and people's daily lives. But at the same time, due to the rapid development of these industries and the increase of employees, the price of raw materials also is being greatly increased.
So how to increase the fuel oil's added value and price on the basis of keeping low raw material cost? The easiest way is to distill (or called rectification) again the crude oil which produced from waste plastics, rubbers, and dirty used oils. This type of fuel oil is in light yellow or light red color and its technical indexes of quality can match diesel's standard. There are two methods to produce this type of fuel oil, one is to set up a large-size petrochemical refining unit costs more than 1 billion US Dollars, the other one is to use low-cost earth furnace. Large refining system brings high cost, but earth furnace is with low working efficiency, unsafely, and not environmental friendly.
Our company just developed a new system which can solve these two problems, save your cost and increase the working efficiency at the safe and environment friendly working conditions. It's Waste Oil Distillation & Converting System Series BOD.
Face Milling Cutter