Electric Fat Tire Bike,Fat Tire Electric Bike,Fat Tire Electric Mountain Bike,Electric Mountain Bikes Mid Motor FOSHAN GUANSEN BICYCLE TECHNOLOGY CO.,LTD. , https://www.hedatx.com
Material
Typical Values
Designation Code
Density g/cm3
Tensile Properties
Young's modulus, Gpa
Un-notched Charpy Impact Energy,J
Hardness,Rockwell
UTS. Mpa
Y.S. (0.2%), Mpa
Elongation (in 25.4mm) %
Macro (apparent)
Micro (converted)
MIM-Fe2Ni
7.8
280
115
25
55 HRB
50 HRC
MIM-Fe8Ni
7.8
450
12
84 HRB
50 HRC
MIM-2200 (as sintered)
7.8
290
125
40.0
190
135
45 HRB
MIM-2700 (as sintered)
7.8
415
255
26.0
190
175
69 HRB
MIM-4605 (as sintered)
7.8
440
205
15.0
200
70
62 HRB
MIM-4605 (Q&T)
7.8
1655
1480
2.0
205
55
48 HRC
55 HRC
MIM-304
7.8
500
70
60 HRB
MIM-316L (as sintered)
7.85
520
175
50.0
190
190
67 HRB
MIM-410
7.7
900
7
40 HRC
MIM-420 (heat treated)
7.7
1380
1200
12
190
40
45-60 HRC
MIM-430L (as sintered)
7.8
410
240
25.0
210
150
65 HRB
MIM-440C
7.8
700
590
15
45-60 HRC
MIM-17-4PH (as sintered)
7.8
900
730
6.0
190
140
27 HRC
MIM-17-4PH (heat treated)
7.8
1190
1090
6.0
190
140
-
45-60 HRC
Powder Metallurgy Injection Molding High Strength Lock Accessories
Technics: MIM
Quoted Condition: 2D / 3D Drawing / Sample
Package: Carton, Plastic Bag, Export Package
OEM/ODM: Welcome
Production Time: 15-30 Days
Weight: 24.8g
Size: 102.5*10.4 mm
Trademark: drome
Transport Package: Carton
Specification: 290*190
Origin: Suzhou, China
MIM (Metal Injection Molding) is the fifth generation of metal forming technology. Over 40 years of development, people gradually find more applications for MIM process, especially in the 3C products application. From initial groping to mature stage, MIM technology witness the ups and downs of 3C products in the past ten years. Fortunately, there are several parts of design such as hinges, fiber optic connector bases, and new style connectors are closely dependent on MIM technology. These products are being produced in a large number and MIM technology is being adopted by more and more.
Drome can provide one-stop service solution. The basic attributes include:
1. Economical production of complex parts with weight from 0.03 to 200g from high-performance engineering materials.
2. Parts with high dimensional precision (±0.1%~±0.5%) and good surface quality (surface roughness 1~2μm).
3. Parts with high relative density (96%~100%), homogeneous microstructure and superior performance.
4. Adaptable to powders of various materials and wide application of the parts.
5. Material saving through the recycle of wastes, production process with high level of automation and suitable for mass production
Flow chart of metal injection molding
Application of MIM
Products Range: