Depending on the temperature you wish to heat the seat to, this quality heated seat allows for temperature adjustment from 30-degrees C to 60-degrees C. With this, you can easily select on the appropriate temperature for every situation. That said, it has been equipped with a digit controller timer for easy preprogramming when to heat. It features a headrest strap that has a buckle clip, which offers a hook and loop closure.
The good thing is that the seat is very comfy thanks to the soft cushion pad. The auto heated sear cushion is very safe and non-slip. Seat Heater Cover,Car Seat Heater Cover,Heated Neck Pads,Heated Carbon Fiber Seat Pads JiLin Province Debang Auto Electric Co.,Ltd. , https://www.dbatelectric.com
Â
Motors are designed with quality material and unique features to assure years of dependable operation.
NEMA standard flange connector.
Oil-filled motor keeps windings cool, permanently lubricated bearings to provide reliable pump service.
Wateright double-insulated cable entry system prevents capillary action and protects against moisture.
A rubber diaphrage is provided to guard against pressure and volume variations due to thermal expansion of oil inside the motor.
Meet the requirements of Standard IEC34-1 with fully sealed shaft 6 inches NEMA standard flange connector Angular contact bearing installed on the bottom side of motor standing for even more axial loadWith stainless steel shaft, credible mechanical seals Axial load:15,500NWith throw sand bush, reinforced butyl rubber house for press balance device
Specofocation:
Power
three phase,4kw~18.5kw
Power supply
 three phase, 400V±10%,50HZ ,direct start
Protection class
IP68
Insulation class
F
Water temperature
 up to 35
PH
6.5-8.0
Minimum water flux through motor
16cm3/s
Maximum numbers of start
20/h
Vertical or horizontal installation
 yes
Anti water connect cable
 3x4.0mm2 or 3x6.0mm2
Why choose Laurel?
Â
 Strong R&D capacity Â
Â
            1.a professional technician team
Â
           2.modernized laboratory equipped with advanced facilities
Â
           3.promote new products every year
Â
           4. Laurel patent design of key parts and appearance
Â
Powerful production capacity
Â
       1.5 production base, over 100 employees
Â
          2.annual output of 10,0000generator sets and 2 million alternators
Â
          3.key parts made by ourselves,such as alternator,engine,mufflers,control pannel,air filter,etc
Â
          4.provide OEM service for world-famous generator brand
Â
Reliable service
Â
      1.professional subsidiary trading company, experienced staff, 35 years export history
Â
       2.annual sale volume reached $30 million
Multistage Submersible Vertical Centrifugal Pump
Â
Motors are designed with quality material and unique features to assure years of dependable operation.
NEMA standard flange connector.
Oil-filled motor keeps windings cool, permanently lubricated bearings to provide reliable pump service.
Wateright double-insulated cable entry system prevents capillary action and protects against moisture.
A rubber diaphrage is provided to guard against pressure and volume variations due to thermal expansion of oil inside the motor.
Meet the requirements of Standard IEC34-1 with fully sealed shaft 6 inches NEMA standard flange connector Angular contact bearing installed on the bottom side of motor standing for even more axial loadWith stainless steel shaft, credible mechanical seals Axial load:15,500NWith throw sand bush, reinforced butyl rubber house for press balance device
Specofocation:
Power
three phase,4kw~18.5kw
Power supply
 three phase, 400V±10%,50HZ ,direct start
Protection class
IP68
Insulation class
F
Water temperature
 up to 35
PH
6.5-8.0
Minimum water flux through motor
16cm3/s
Maximum numbers of start
20/h
Vertical or horizontal installation
 yes
Anti water connect cable
 3x4.0mm2 or 3x6.0mm2
Why choose Laurel?
Â
 Strong R&D capacity Â
Â
            1.a professional technician team
Â
           2.modernized laboratory equipped with advanced facilities
Â
           3.promote new products every year
Â
           4. Laurel patent design of key parts and appearance
Â
Powerful production capacity
Â
       1.5 production base, over 100 employees
Â
          2.annual output of 10,0000generator sets and 2 million alternators
Â
          3.key parts made by ourselves,such as alternator,engine,mufflers,control pannel,air filter,etc
Â
          4.provide OEM service for world-famous generator brand
Â
Reliable service
Â
      1.professional subsidiary trading company, experienced staff, 35 years export history
Â
       2.annual sale volume reached $30 million
Multistage Submersible Vertical Centrifugal Pump
Model NO.: LP6SD
Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Submersible Pump
Industry: Fisheries Pump
Media: Sewage Pumps
Performance: Automatic Pump
Theory: Centrifugal Pump
Item Power: Three Phase,4kw~18.5kw
Power Supply: Three Phase, 400V;10%,50Hz ,Direct Start
Protection Class: IP68
Insulation Class: F
Water Temperature: up to 35
pH: 6.5-8.0
Minimum Water Flux Through Motor: 16cm3/S
Maximum Numbers of Start: 20/H
Item Fuel: Electric
Item Application: Submersible
Trademark: Laurel
Transport Package: Carton
Specification: according to the item′s size
Origin: China
HS Code: 8413602202
Model NO.: LP6SD
Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Submersible Pump
Industry: Fisheries Pump
Media: Sewage Pumps
Performance: Automatic Pump
Theory: Centrifugal Pump
Item Power: Three Phase,4kw~18.5kw
Power Supply: Three Phase, 400V;10%,50Hz ,Direct Start
Protection Class: IP68
Insulation Class: F
Water Temperature: up to 35
pH: 6.5-8.0
Minimum Water Flux Through Motor: 16cm3/S
Maximum Numbers of Start: 20/H
Item Fuel: Electric
Item Application: Submersible
Trademark: Laurel
Transport Package: Carton
Specification: according to the item′s size
Origin: China
HS Code: 8413602202
Multistage Submersible Vertical Centrifugal Pump