The gear housing is the casing that surrounds the mechanical components of a gear box. It provides mechanical support for the moving components, a mechanical protection from the outside world for those internal components, and a fluid-tight container to hold the lubricant that bathes those components.
Gearbox Housing,Bearing Housing,Mold Gear Box,Aluminum Cv Joints Ningbo Jinyao Machinery Company. LTD , https://www.cardiecastingmold.com
The asphalt transportation tank can be set to maintain the asphalt temperature in the range of 10°C-180°C according to the needs of the construction unit. The asphalt output from the asphalt plant can be directly transported to the site for storage or pumped to the asphalt spreader. The tank volume is directly measured, and one tank of asphalt can be distributed to several users for use. The transportation of emulsified asphalt has the function of pumping in and out, avoiding the possibility of direct contact between emulsified asphalt and air during transportation and loading and unloading, and the possibility of emulsified asphalt breaking is greatly reduced. The whole pipeline uses a heat transfer oil system, and there is no pipe blockage.
The equipment is in the form of a tank container, independent power, and can be used as a temporary asphalt transfer station. The control system is controlled by PC, and the quantitative system is determined by LD, which is reliable and accurate.
In the process of product development, Mach uses its own technology research and development and manufacturing advantages to integrate superior resources, and collaboration units such as Xizi Hoisting Machinery Co., Ltd., Zhejiang University SUNTEC Solar Appliance Co., Ltd., Zhejiang Construction Machinery Co., Ltd., Zhejiang Jing Card Motor Co., Ltd., Foton Ouman Automobile Co., Ltd., Dongfeng Motor Hangzhou Co., Ltd., etc., closely cooperate, jointly tackle the problem, and climb the peak of technology, give full play to the synergy unit and the advantages of technology, manufacturing and channel to make the production of intelligent asphalt The transportation tank products have high technology content and stable quality, and are the best upgraded products of traditional asphalt transportation tanks.
The advent of this product has improved the asphalt transportation tank product by a grade and has a good market development prospect. At present, the product has applied for patents from the National Patent Office.
Type of housings
Split Housing : is like a walnut shell, the housing is divided in two parts, and lower part that tie down the Gear Box to the structure, support all the components during the assembly stage and hold the lubrication oil; and the upper part that complete the enclosure and provide mechanical integrity to the Housing. The upper and lower parts of the housing have a mating surface that seals perfectly the housing to avoid oil leaks and fatigue of the housing.
Bathtub Housing: is mage on a single piece and have a top opening for servicing the gear box and side opening to accommodate the Bearing Housing associated to the gear shafts. Have in general a better leak free performance but is more difficult to assembly and repair.
Mach Machinery Manufacturing Company closely cooperates to climb the peak of technology
Since the beginning of January this year, Mach Machinery Manufacturing Co., Ltd. has accelerated the pace of research and development of new products, upgrading the original old products. After nearly five months of joint scientific research, the developed intelligent transport tanks finally developed. Compared with the traditional asphalt transportation tank, the equipment has the following characteristics: AUMAN full suspension system trailer, European style, Austrian Steyr technology vortex supercharged environmental protection engine, high horsepower, high efficiency.