*Strong stability: working stability in AC 100-240V, and suitable for the range of 50-60Hz
* High protection level: protection level reached to IP65, it allowed pump to provide safe services at severe operaton condition
*Ball check valves: it through double valve ball, seat and sleeve to form the sealing system, that enhance the precision
*High speed operation: high measurement precisions, up to 360 strokes per minute which eliminate the pulsation effect.
*Durable diaphragm: the diaphragm is made by PTFE, which is
compatible with all kinds of chemicals. In typical use, the diaphragm
can last up to five years, which 5 times as national standard
GB/T7782-2008
*Several types: manual control or automatic control, the
automatic control can divided to: 4-20mA electric current signal
control, digital impulse signal feedback control, digital impulse
feedback control with Rs485 communication interface, 4-20mA electric
current signal control with Rs485 communication
interface.
*Percentage adjustment: local adjust percentage for stroke
and frequency
0~100%
*Level monitor, low-level shutoff with alarm output
PVDF Head Solenoid Dosing Pump Pvdf Head Solenoid Dosing Pump,Pvdf Head Chemical Dosing Pump,Pvdf Head Dosing Metering Pump,Pvdf Head Solenoid Diaphragm Metering Pump Zhejiang Ailipu Technology Co., LTD. , http://www.alipu.com
GMT plastic extruders are applied to PVC pipe extrusion line, PVC profile extrusion line, PVC modification pelletizing line, wood plastic composite product extrusion line and etc. Whole line is also available to supply, accdording to your requirements. Please kindly contact with our top sales directly for more details.
Conical Twin Screw Extruder machine is applicant for PVC powder material, with different mould and downstream equipment; it can produce pipe, profile, plate&sheet, and pelletizing. The extruder features in good plasticization, even melting, high output capacity, wide application and reliable stability, specially designed gearbox and distributor and reinforced thrust bearing realize large transmission torque and long operation time. Electrical control system: Siemens PLC/PCC auto control system or RKC temperature control, and ABB Invert/transducer, Siemens contactor, and several alarm system.
Technical Parameters for different plastic extrusion line
Â
Use for pipe extrusion
Model
Screw diameter
(mm)L/D ratio
Drive power
(kw)Center height  Â
(mm)Output
(kg/h)HDPE
GMT45/33
45
33:1
37
1000
150
GMT65/33
65
33:1
75
1000
300
GMT75/33
75
33:1
110
1100
450
GMT90/33
90
33:1
160
1100
600
GMT120/33
120
33:1
280
1100/1300
950
GMT150/33
150
33:1
400
1300
1350
Â
Â
Â
Â
Â
Â
Use for profile,sheet extrusion
Model
Screw diameter
L/D ratio
Drive power
Screw speed
Output(kg/h)
Â
(mm)
Â
(kw)
(rpm)
HDPE
GMT45
45
35:1
15-22
120
15-45
GMT65
65
35:1
30-45
100
60-120
GMT75
75
35:1
45
100
80-150
GMT90
90
35:1
55-90
90
150-280
GMT120
120
35/38:1
132-185
90
250-450
GMT130
130
35:1
185-280
90
300-650
GMT150
150
35:1
185-315
80
400-600
For more information, please kindly contact as below:
Â
Mobile: 0086-13917356326
Â
Â
Â
Product Introduction
GMT plastic extruders are applied to PVC pipe extrusion line, PVC profile extrusion line, PVC modification pelletizing line, wood plastic composite product extrusion line and etc. Whole line is also available to supply, accdording to your requirements. Please kindly contact with our top sales directly for more details.
Conical Twin Screw Extruder machine is applicant for PVC powder material, with different mould and downstream equipment; it can produce pipe, profile, plate&sheet, and pelletizing. The extruder features in good plasticization, even melting, high output capacity, wide application and reliable stability, specially designed gearbox and distributor and reinforced thrust bearing realize large transmission torque and long operation time. Electrical control system: Siemens PLC/PCC auto control system or RKC temperature control, and ABB Invert/transducer, Siemens contactor, and several alarm system.
Technical Parameters for different plastic extrusion line
Â
Use for pipe extrusion
Model
Screw diameter
(mm)L/D ratio
Drive power
(kw)Center height  Â
(mm)Output
(kg/h)HDPE
GMT45/33
45
33:1
37
1000
150
GMT65/33
65
33:1
75
1000
300
GMT75/33
75
33:1
110
1100
450
GMT90/33
90
33:1
160
1100
600
GMT120/33
120
33:1
280
1100/1300
950
GMT150/33
150
33:1
400
1300
1350
Â
Â
Â
Â
Â
Â
Use for profile,sheet extrusion
Model
Screw diameter
L/D ratio
Drive power
Screw speed
Output(kg/h)
Â
(mm)
Â
(kw)
(rpm)
HDPE
GMT45
45
35:1
15-22
120
15-45
GMT65
65
35:1
30-45
100
60-120
GMT75
75
35:1
45
100
80-150
GMT90
90
35:1
55-90
90
150-280
GMT120
120
35/38:1
132-185
90
250-450
GMT130
130
35:1
185-280
90
300-650
GMT150
150
35:1
185-315
80
400-600
For more information, please kindly contact as below:
Â
Mobile: 0086-13917356326
Â
Â
Â
High Quality Single Screw Barrel for Plastic Recycling Extrusion Machine
Model NO.: GMT-extruder
Drive Power: 37-400
Center Height: 1100
Output: >150
Trademark: GMT
Transport Package: According to Your Requirement
Specification: CE
Origin: China
HS Code: 84778000
Model NO.: GMT-extruder
Drive Power: 37-400
Center Height: 1100
Output: >150
Trademark: GMT
Transport Package: According to Your Requirement
Specification: CE
Origin: China
HS Code: 84778000
Product Introduction